The bq24085/6/7 evaluation module (EVM) provides a convenient method for evaluating the performance of a charge management solution for portable applications using the bq24085/6/7 product family. The charger is designed to deliver up to 750 mA of continuous charge current for single-cell Li-Ion or Li-polymer applications using a DC power supply. The bq24085/6/7 series are highly integrated Li-Ion and Li-polymer linear chargers, targeted at space-limited portable applications.
Bargain Price: £55.99
The TPS72728DSEEVM-406 evaluation module is a fully assembled and tested circuit for evaluating the TPS72728 low-dropout linear regulator in the DSE (1.5 x 1.5mm SON-6) package.
The LM34925EVAL evaluation board facilitates evaluation of the LM34925 100V, 100mA Constant On-Time Synchronous Buck Regulator. An isolated bias supply is implemented in this evaluation board with the LM34925 the Constant On-Time regulator. The LM34925 regulator integrates both the high and low side power switches essential for creating an isolated buck converter.
The CDCLVP2104 is a high-performance, low additive phase noise clock buffer. It has two universal input buffers that support either single-ended or differential clock inputs. Each input feeds a bank of four LVPECL outputs. The device also features on-chip bias generators that can provide the LVPECL common-mode voltage to the device inputs.
The TAS5710 evaluation module (EVM) demonstrates the TAS5710 device from Texas Instruments. The TAS5710EVM demonstrates a high-performance 20-W digital-input audio power amplifier. This EVM can be configured with two bridge-tied loads (BTL).
The DRV8833 evaluation module (EVM) demonstrates the capabilities and performance of the DRV8833 integrated circuit from Texas Instruments. The DRV8833 is a low voltage, 2A stepper or single / dual brushed DC motor driver. It can also be used to drive solenoids or relays.
The Texas Instruments TPS54821EVM-049 evaluation module (EVM) helps designers evaluate the TPS54821 Synchronous Step-Down SWIFT Converter with Hiccup Overcurrent Protection. The EVM accepts an 8V to 17V input and provides a 3.3V output at 8A. Terminal blocks are provided for input and output voltages.
The DRV8813 evaluation module consists of a 2.5A, dual-H-bridge motor driver with a Phase/Enable control interface and a small number external components that can be used to drive a single bipolar stepper motor. The on-board MSP430 MCU + software/GUI provides signaling and control and supports up to 16 microsteps. With the DRV8813EVM, designers can quickly and easily evaluate the performance of DRV8813 motor driver in their specific application.
The C2000 Experimenter Kits from Texas Instruments are ideal products for OEMs to use for initial device exploration and testing. The Piccolo F28069 Experimenter Kit has a docking station that features on board USB JTAG emulation, access to all controlCARD signals, breadboard areas and RS-232 and JTAG connectors. Each kit contains a F28069 controlCARD.
The LM3152-3.3 demonstration board is a part of the PowerWise® family of SIMPLE SWITCHER® Controllers. It has been designed to balance solution size and performance. The Constant-On-Time (COT) Emulated Ripple Mode (ERM) Control allows for the use of low ESR output capacitors and therefore decreases the output voltage ripple while maintaining a fast transient response.
The ADS1015EVM is an evaluation board for the ADS1015, a 12-bit, multi-channel, delta-sigma analog-to-digital converter (ADC). The modular EVM uses two ADS1015s and minimal circuitry to demonstrate functionality and I²C bus communication for prototyping and part evaluation. The pins of the ADS1015 are accessible through various connections on the ADS1015EVM connectors.