The BQ24125 EVM helps you evaluate the performance of a charge management solution for portable applications using the BQ24120x product family. A complete, designed, and tested charger is presented. The charger can deliver up to 2 A of continuous output current and is programmed from the factory to deliver 1.33 A of charging current.
Bargain Price: £59.99
The UCC28514EVM Evaluation Module is a 100-W offline AC-DC voltage converter with Power Factor Correction (PFC). The prototype was designed to show how the UCC28514 could be configured to control a dc-regulated ouput offline with one control integrated circuit. The module was designed to operate over a universal input range of 85 V to 265 V with a regulated 240V, 100-W output.
TI's Power-saver equalizer compensates for transmission medium losses and minimizes medium-induced deterministic jitter. Performance is guaranteed over the full range of 1 to 5 Gbps. The DS38EP100 requires no power to operate. The equalizer operates anywhere in the data path to minimize media-induced deterministic jitter in both FR4 and cable applications. Symmetric I/O structures support full duplex or half duplex applications. Linear compensation is provided independent of line coding or protocol.
The BQ24158EVM-697 evaluation module is a complete charger module for evaluating compact, flexible, high-efficiency, USB-friendly, switch-mode charge management solution for single-cell Li-ion and Li-polymer batteries used in a wide range of portable applications. The bq24158 integrates a synchronous PWM controller, power MOSFETs, input current sensing, high-accuracy current and voltage regulation, and charge termination, into a small WCSP package. The charge parameters can be programmed through an I²C interface.
The Haptic Bluetooth® Kit is a complete evaluation and design kit for prototyping haptic feedback in any application. The board features the DRV2605 Eccentric Rotating Mass Motor (ERM) and Linear Resonant Actuator (LRA) Haptic Driver with integrated effect library licensed from Immersion. The board also includes an LRA, alkaline battery support, and can be programmed and controlled by the included iOS™ App via the SimpleLink™ Bluetooth Low Energy CC2541 wireless MCU.
The eZ430 – RF2500 USB-Stick Tool is not only an extended version of the earlier eZ430 – F2013, but instead also the possibility of implementing very simple radio applications. Both the accompanying target boards possess along with the MSP430F2274 controller also a CC2500 transceiver (2.4GHz) sas well as a chip-antenna. Since the most important MCU pins have been led outwards, the radio clip-on board can be integrated easily in an application. The emulator part of the USB Stick offers the possibility of transferring data from the radio module (UART of the controller) to the PC (UART on the USB Back-Channel) in addition to the functions of the eZ430 – F2013.
The TPS92310-12FB evaluation module is a constant current output LED driver supporting 5 W to 8 W applications. The design focuses on applications that require small form factor and minimal number of external components. The actual PCB dimension of the mo
The ADS1220EVM is an evaluation system for the ADS1220, a 24-bit, multi-channel, delta-sigma (ΔΣ) analog-to-digital converter (ADC). The EVM uses the ADS1220 along with minimal circuitry to demonstrate functionality for prototyping and part evaluation. The pins of the ADS1220 are accessible through various connections on the ADS1220EVM connectors. The EVM also contains a MSP430 for use with a personal computer.
The ADS7863EVM uses a circuit board that will evaluate the ADS7861, ADS8361 and ADS7863 ADCs, 12-bit and 16-bit devices. The ADS7861 operates from 5 volts for AVdd & DVdd while the ADS8361 operates from 2.7V to 3.6V for AVdd & DVdd and the ADS7863 operates from 2.7V to 5.5V for AVdd and DVdd. The evaluation board has a 500 kSPS, 12-bit/16-bit serial output. The analog inputs can be configured single-ended or differential.
The TPS22922EVM is an evaluation module for the Texas Instruments family of low-input voltage, ultra-low rON load switches. This EVM operates over a 0.9 V to 3.6 V range and provides a continuous output current of up to 110 mA. Additional open resistor and capacitor footprints allow for the use of customer-selected input and output load values. The TPS22922EVM accepts a YFP-6 packaged load switch for any of three (3) possible devices: TPS22921, TPS22922, or TPS22922B.
The MSP-TS430PW28 is a standalone ZIF socket target board used to program and debug the MSP430 in-system through the JTAG interface or the Spy Bi-Wire (2-wire JTAG) protocol. The development board supports some MSP430F Flash parts in a 28-pin TSSOP package (TI package code: PW). Please check your target's device documentation to find the correct target board.