PCB design board Texas Instruments SN65MLVD2-3EVM Stockists

The SN65MLVD2 and SN65MLVD3 are single-channel M-LVDS receivers. These devices are designed in full compliance with the TIA/EIA-899 (M-LVDS) standard, which are optimized to operate at signaling rates up to 250 Mbps. Each receiver channel is controlled by a receive enable (/RE). When /RE = low, the corresponding channel is enabled; when /RE = high, the corresponding channel is disabled.


Bargain Price: £72.99

PCB design board Texas Instruments SN65MLVD2-3EVM Deals on eBay PCB design board Texas Instruments SN65MLVD2-3EVM Deals on Amazon
StockistProductPrice 
BargainplacePCB design board Texas Instruments SN65MLVD2-3EVM£72.99Visit Store


PCB design board Texas Instruments SN65MLVD2-3EVM Related Products:

 
 

PCB design board Texas Instruments XILINXPWR-083

SWIFTTM (TPS54xxx series) DC/DC Converter-based Power Management Solution Providing ICCINT =1.5A from VIN =5V

PCB design board Texas Instruments XILINXPWR-083 on eBay PCB design board Texas Instruments XILINXPWR-083 on Amazon

 
 

PCB design board Texas Instruments EVM430-F6736

This EVM430-F6736 is a single-phase electricity meter evaluation module based on the MSP430F6736 device. The E-meter can be connected to the main power lines and has inputs for voltage and current, as well as a third connection to setup anti-tampering. It allows a customer to test the new MSP430F673x/F672x series and see the accuracy result, wide dynamic range achieved and ease of calibration.

PCB design board Texas Instruments EVM430-F6736 on eBay PCB design board Texas Instruments EVM430-F6736 on Amazon

 
 

PCB design board Texas Instruments BQ24765EVM

The bq24765 evaluation module is a complete charger module for evaluating a multi cell integrated power MOSFETs synchronous notebook charge using the bq24765 devices. It is designed to deliver up to 8A of charge current to Li-Ion or Li-Pol applications. The charge current is programmable by SBS-like SMBus interface.

PCB design board Texas Instruments BQ24765EVM on eBay PCB design board Texas Instruments BQ24765EVM on Amazon

 
 

PCB design board Texas Instruments TPS7A4515EVM-385

The TPS7A4515EVM-385 facilitates evaluation of the TPS7A4515 1.5A Low-Noise, Fast-Transient-Response Low-Dropout Regulator. The EVM allows the user to apply different input voltage levels (2.5V to 20V) and different loads (0 to 1.5A) and check the regulated output voltage for stability.

PCB design board Texas Instruments TPS7A4515EVM-385 on eBay PCB design board Texas Instruments TPS7A4515EVM-385 on Amazon

 
 

PCB design board Texas Instruments LM25574BLDT

The LM5574 and LM25574 switching regulators feature all of the functions necessary to implement an efficient high voltage buck regulator using a minimum of external components. These easy to use efficient high voltage buck regulator using a minimum of external components. These easy to use regulators include either a 42V (LM25574) or a 75V (LM5574) N-Channel buck switch with an output current capability of 0.5 Amps. The operating frequency is programmable from 50kHz up to 1MHz.

PCB design board Texas Instruments LM25574BLDT on eBay PCB design board Texas Instruments LM25574BLDT on Amazon

 
 

PCB design board Texas Instruments TPS65217CEVM

The TPS65217CEVM is a fully assembled platform for evaluating the performance of the TPS65217C power management device.

PCB design board Texas Instruments TPS65217CEVM on eBay PCB design board Texas Instruments TPS65217CEVM on Amazon

 
 

PCB design board Texas Instruments LM3423BBLSCSEV/NOPB

This wide range evaluation board showcases the LM3423 NFET controller used with a buck-boost current regulator. It is designed to drive 4 to 8 LEDs at a maximum average LED current of 700 mA from a DC input voltage of 10 to 70V. The evaluation board showc

PCB design board Texas Instruments LM3423BBLSCSEV/NOPB on eBay PCB design board Texas Instruments LM3423BBLSCSEV/NOPB on Amazon

 
 

PCB design board Texas Instruments TPS2113AEVM-581

The TPS211xAEVM is an evaluation module for the Texas Instruments TPS211xA family of two-input, one-output power multiplexers. These multiplexers enable seamless transition between two power supplies, each operating at 2.8 V-5.5 V and delivering up to 1 A. TPS211xA EVM-061 is used for TPS211xAPW packaged parts.

PCB design board Texas Instruments TPS2113AEVM-581 on eBay PCB design board Texas Instruments TPS2113AEVM-581 on Amazon

 
 

PCB design board Texas Instruments DAC7741EVM

This EVM features the DAC7741 digital-to-analog converter. The DAC7741EVM is a simple evaluation module designed for a quick and easy way to evaluate the functionality of the high-resolution, single-channel, parallel input DAC. This EVM features a parallel interface to communicate to any host processor base system.

PCB design board Texas Instruments DAC7741EVM on eBay PCB design board Texas Instruments DAC7741EVM on Amazon

 
 

PCB design board Texas Instruments TLV70433DBVEVM-712

The TLV70433DBVEVM-712 is a fully assembled and tested circuit for evaluating the TLV70433 Low-Dropout Regulator in the DBV (SOT23-5) package.

PCB design board Texas Instruments TLV70433DBVEVM-712 on eBay PCB design board Texas Instruments TLV70433DBVEVM-712 on Amazon




Copyright © Bargainplace.uk Inc. All Rights Reserved. In association with Bargainplace.co.uk