The DIM168 controlCARD allows users to easily evaluate all the functionality of the 300MHz C28346 floating point controller. The card provides all the chip support necessary, needing only a 5V supply to be fully functional. Using the controlCARD users can easily access all C28346 pins through the DIM168 interface. The card also provides two 128KB external RAM memories and a 64KB EEPROM. The DIM168 controlCARD is not compatible with existing C2000 controlCARD tools.
Bargain Price: £180.00
The LM4782 is a three channel audio amplifier capable of typically delivering 25W per channel of continuous average output power into an 8? load with less than 0.5% THD+N from 20Hz to 20kHz. The LM4782 is fully protected utilizing TI's Self Peak Instantaneous Temperature (ºKe) (SPiKe™) protection circuitry which completely safeguards its outputs against over-voltage, under-voltage, overloads, shorts to the supplies or GND, thermal runaway and instantaneous temperature peaks.
The TPS62700EVM-264 evaluation module (EVM) helps designers evaluate the operation and performance of the TPS62700 step-down converter. This converter is a 2.25 MHz, synchronous, step-down converter that provides up to 650 mA of output current at a pin-programmable output for powering PA applications.
The ADS7866EVM is a full-featured reference design, prototype, and software platform for the ADS7866ADC. The reference design feature contains essential circuitry to show case the A/D converter. It gives the ability to change the input components to use different input frequencies.
This evaluation board provides a solution to examine the high efficiency LM21215A-1 buck switching regulator. The LM21215A-1 is capable of driving up to 15A of continuous load current with excellent output voltage accuracy due to its ±1% internal reference. This device also features a clock synchronization input that allows the switching frequency to be synchronized to an external clock source.
The TPS659121 Evaluation Module (EVM) is designed to facilitate evaluation of the power management integrated circuit. The EVM allows for evaluation of the TPS659121 device which provides four configurable step-down converters with up to 2.5A output current for memory, processor core, I/O, or pre-regulation of LDOs. It also contains 10 LDO regulators for external usage which can be supplied from either a battery or a pre-regulated supply.
The TSC2101 is an advanced touch screen controller, which communicates to a host processor through an SPI serial interface. In addition, a mono-input/stereo-output audio codec is included in the TSC2101, and audio data is communicated to the device over an I2S bus. The TSC2101EVM accesses both of these buses through the use of a USB microcontroller, which provides a way to generate data for both buses from a PC running Windows 98SE, 2000, or XP.
The ADS8325EVM-PDK is a complete evaluation/demonstration kit, which combines ADS8325EVM with the DSP-based MMB0 board as a motherboard. The mother board and the ADCPro™ evaluation software are supplied for use with a personal computer running Microsoft™ Windows operating system. This combination of boards allows the complete evaluation of the ADS8325 device.
The TPS826xxEVM-646 is a fully assembled and tested platform for evaluating the performance of the TPS82671, TPS82675, TPS82690 and TPS82695 high-frequency, synchronous, step-down dc-dc converters optimized for battery-powered portable applications.
The ADS5517EVM is a circuit board that allows designers to evaluate the performance of Texas Instruments‘ ADS5517 device, an 11 bit 200 MSPS analog to digital converter. The circuit board allows for the ability to evaluate the ADS5517 operating in either DDR LVDS output mode or CMOS output mode. An onboard FPGA decodes the ADC output mode and provides the ADC data on a CMOS output header.
The TPS65185EVM is a fully assembled platform for evaluating the performance of the TPS65186 EINK display driver.