The TPA2031D1 audio power amplifier evaluation module is a complete, low-power single-channel audio power amplifier. It consists of the TI TPA2031D1 2.5-W low-voltage Class-D audio power amplifier IC in a very small NanoFree™ WCSP package, along with a small number of other parts mounted on a circuit board that is approximately 1.25-inches square. Single in-line header pins are mounted to the underside of the module circuit board.
Bargain Price: £59.99
The Hercules™ RM46x LaunchPad™ Development Kit is an inexpensive evaluation platform designed to help you get started quickly in evaluating and developing with the Hercules microcontroller platform. The LaunchPad Development Kit is based on the IEC 61508 SIL 3 certified RM46L852, which is a lockstep ARM® Cortex®-R4F based MCU with integrated safety features and peripherals such as two 12-bit ADCs, programmable High-End timers, motor control peripherals (eQEP, eCAP, ePWM), USB, Ethernet, MibSPI and serial communication interfaces. Hercules RM MCUs can help reduce the development effort of IEC 61508 functional safety applications.
15A, 12V Input, 1.5V Output Evaluation Module
The SIMPLE SWITCHER power module evaluation board is optimized for peak performance and increased flexibility. By incorporating additional ceramic and an aluminum filter capacitor, the power module EVAL board demonstrates the low output ripple, fast transient response, and low conducted and radiated EMI performance of the device. Adjusting the output voltage, optimizing the control loop circuitry, and fine-tuning the filter capacitance is ease, with convenient size and placement of the passive components on the board. Finally, the excellent thermal performance of the power modules is enhanced using a 4-layer 1oz copper PCB.
This evaluation module provides a VID interface to demonstrate the LM10010 and its control of an LM21215A-1 buck regulator. While operating from 3.0V to 5.5V, the LM10010 can adjust the LM21215A-1 output voltage from 0.7V to 1.1V in 6.4mV steps with a default startup output of 1.0V. A communications dongle and cable is provided with software to control the output voltage through a graphical user interface (GUI) and an USB port.
SMA breakout daughterboard for TLK10034
This EVM features the DAC8560 digital-to-analog converter (DAC). The DAC8560EVM is a simple evaluation module designed to quickly and easily evaluate the functionality and performance of the 16-bit high-resolution, single-channel, serial input DAC. The device has a 2.5 V internal reference that is enabled by default.
The DRV201 evaluation module (EVM) demonstrates the capabilities and performance of the DRV201 integrated circuit from Texas Instruments. The DRV201 is 100mA Voice Coil Motor Driver with advanced ringing compensation supporting fast autofocus algorithms in cell phone and digital still cameras.
The TPS718xx and TPS719xx families of low-dropout (LDO) regulators offer a high power-supply rejection ratio (PSRR), low noise, fast start-up, and excellent line and load transient responses while consuming a very low 90µA (typical) at no load ground current with both LDOs enabled. The TPS719xx also provides an active pulldown circuit to quickly discharge output loads. The TPS718xx and TPS719xx are stable with ceramic capacitors and use an advanced BiCMOS fabrication process to yield a typical dropout voltage of 230mV at 200mA output loads.
The Texas Instruments TPS79330YEQEVM evaluation module (EVM) helps designers evaluate the operation and performance of the TPS79325 low dropout linear regulator (LDO) in the chip-scale package. The TPS79325 is an ultra low noise, high PSRR LDO suitable for RF applications.
The bq24270/271 evaluation module is a complete charger module for evaluating compact, flexible, and high-efficiency charge-management solutions for single-cell, Li-ion, and Li-polymer batteries used in a wide range of portable applications. These charge-management solutions are also switch-mode and USBfriendly.