The TPA2036D1 audio power amplifier evaluation module is a complete, low-power single-channel audio power amplifier. It consists of the TI TPA2036D1 2.5-W low-voltage Class-D audio power amplifier IC in a very small NanoFree. WCSP package, along with a small number of other parts mounted on a circuit board that is approximately one and a quarter inches square.
Bargain Price: £59.99
| Stockist | Price | |
|---|---|---|
| Bargainplace | £59.99 | Visit Store |
The ADS1015EVM-PDK is a complete evaluation/demonstration kit, which combines an ADS1015EVM with the MSP430-based MMB3 motherboard for use with a personal computer. The MMB3 motherboard allows the ADS1015EVM to connect to a computer via a USB port. The ADS1015EVM-PDK is controlled by the ADCPro™ evaluation software using a plug-in.
The TSC2101 is an advanced touch screen controller, which communicates to a host processor through an SPI serial interface. In addition, a mono-input/stereo-output audio codec is included in the TSC2101, and audio data is communicated to the device over an I2S bus. The TSC2101EVM accesses both of these buses through the use of a USB microcontroller, which provides a way to generate data for both buses from a PC running Windows 98SE, 2000, or XP.
The TPS2030EVM-290 is an evaluation module(EVM) for the TI family of single-channel, current limited, power distribution switches. These EVMs operate over a 2.7 V to 5.5 V range and provide a continuous output current of up to 2 A. Test points provide convenient access to all critical node voltages.
The LMP8358MAEVAL Evaluation Board provides a platform to test the performance of the LMP8358 Zero-Drift, Programmable Instrumentation Amplifier with Diagnostics. This evaluation board is equipped with GPSI-14 interface. TI provides software and GPSI-14 compatible USB dongle so that the user may program SPI settings from a PC.
The CDCLVD1204/CDCLVD2102 are high-performance, low-additive jitter clock buffers. They have two universal input buffers that support single-ended or differential clock inputs and are selectable through a control pin (for CDCLVD1204 only). The devices also feature on-chip bias generators that can provide the LVDS common-mode voltage to the device inputs.
The CDCS502 is a spread spectrum capable, fundamental mode crystal oscillator with electable frequency multiplication. The crystal frequency is processed by a PLL, whose output frequency is either equal to the input frequency or multiplied by a factor of 4. The PLL is also able to spread the clock signal by +/-0%, +/-0.5%, +/-1% or +/-2% centered on the output clock frequency with a triangular modulation.
The TPD4E05U06DQAEVM is designed to allow 4-port analysis through a 100 Ω TMDS line, or differential pair. The board material is Rogers Board RO4350 with a Dielectric Constant of 3.48 +/- 0.05 and a loss tangent of 0.0031 at 2.5 GHz. The port connectors are surface-mount SMP 50 Ω high speed connectors.
The ADS1246EVM is an evaluation board for the ADS1246, a 24-bit, multi-channel, delta-sigma analog-to-digital converter (ADC). The modular EVM uses the ADS1246 and minimal circuitry to demonstrate functionality for prototyping and part evaluation. The pins of the ADS1246 are accessible through various connections on the ADS1246EVM connectors.
The LM99 is an 11-bit remote diode temperature sensor with a 2-wire System Management Bus (SMBus) serial interface. The LM99 accurately measures: (1) its own temperature and (2) the temperature of a remote diode-connected transistor such as the 2N3904 or a thermal diode commonly found on Graphics Processor Units (GPU), Computer Processor Units (CPU or other ASICs.
The DRV2605 is a haptic driver designed for Linear Resonant Actuators (LRA) and Eccentric Rotating Mass (ERM) motors. It provides many features which help eliminate the design complexities of haptic motor control including reduced solution size, high efficiency output drive, closed-loop motor control, quick device startup, and auto-resonance frequency tracking.