PCB design board Texas Instruments TPA3117D2EVM Stockists

The TPA3117D2 is a 15-W (per channel) efficient, Class-D audio power amplifier for driving bridged-tied stereo speakers. Advanced EMI Suppression Technology enables the use of inexpensive ferrite bead filters at the outputs while meeting EMC requirements. SpeakerGuard™ speaker protection circuitry includes an adjustable power limiter and a DC detection circuit.


Bargain Price: £175.00

PCB design board Texas Instruments TPA3117D2EVM Deals on eBay PCB design board Texas Instruments TPA3117D2EVM Deals on Amazon
StockistProductPrice 
BargainplacePCB design board Texas Instruments TPA3117D2EVM£175.00Visit Store


PCB design board Texas Instruments TPA3117D2EVM Related Products:

 
 

PCB design board Texas Instruments TL1963A-33EVM

The TL1963A-33EVM facilitates evaluation of the TL1963A-33 1.5A Low-Noise Fast-Transient-Response Low-Dropout Regulator. The EVM allows the user to apply different input voltage levels (2.5V to 20V) and different loads (0 to 1.5A) and check the regulated output voltage for stability.

PCB design board Texas Instruments TL1963A-33EVM on eBay PCB design board Texas Instruments TL1963A-33EVM on Amazon

 
 

PCB design board Texas Instruments MSP-TS430PM64A

The MSP-TS430PM64A is a standalone 64pin ZIF socket target board used to program and debug the MSP430 in-system through the JTAG interface or the Spy Bi-Wire (2-wire JTAG) protocol. The development board supports all MSP430 Flash parts in a 64-pin QFP package (TI package code: PM).

PCB design board Texas Instruments MSP-TS430PM64A on eBay PCB design board Texas Instruments MSP-TS430PM64A on Amazon

 
 

PCB design board Texas Instruments THS4304DBVEVM

This EVM is used for testing the THS4304. It is fully populated, ready for testing-just add power, signal source, and monitoring instruments. The gain is configurable, and is configured for a gain of +2. The input and output provide 50 ohm termination.

PCB design board Texas Instruments THS4304DBVEVM on eBay PCB design board Texas Instruments THS4304DBVEVM on Amazon

 
 

PCB design board Texas Instruments LM10500SQ-1.0EV/NOPB

Actively reduces system-level power consumption by utilizing a continuous, real-time, closed-loop Adaptive Voltage Scaling (AVS) scheme. The LM10500 operates cooperatively with PowerWise® AVS compatible ASICs, SoCs, and processors to optimize supply voltages adaptively over process and temperature variations. The device is controlled via PowerWise Interface (PWI) 1.0 or PWI 2.0 high-speed serial interface.

PCB design board Texas Instruments LM10500SQ-1.0EV/NOPB on eBay PCB design board Texas Instruments LM10500SQ-1.0EV/NOPB on Amazon

 
 

PCB design board Texas Instruments CDCLVP1216EVM

CDCLVP1216EVM is the evaluation module for CDCLVP1216. The CDCLVP1216 is a highly versatile, low additive jitter buffer that can generate 16 copies of LVPECL clock outputs from one of two selectable LVPECL, LVDS, or LVCMOS inputs. It has a maximum clock frequency up to 2 GHz. The overall additive jitter performance is less than 0.1 ps, RMS from 10 kHz to 20 MHz, and overall output skew is as low as 30 ps, making the device a perfect choice for use in demanding applications.

PCB design board Texas Instruments CDCLVP1216EVM on eBay PCB design board Texas Instruments CDCLVP1216EVM on Amazon

 
 

PCB design board Texas Instruments DV2003S1

The DV2003S1 Development System provides a development environment for the bq2003 Fast-Charge IC. The DV2003S1 incorporates a bq2003 and a buck-type switch-mode regulator to provide fast charge control for 2 to 16 NiCd or NiMH cells.

PCB design board Texas Instruments DV2003S1 on eBay PCB design board Texas Instruments DV2003S1 on Amazon

 
 

PCB design board Texas Instruments BQ2023EVM-001

The bq2023EVM-001 is a complete evaluation system for the bq2023 FLASH based Battery Monitoring IC. The EVM includes one bq2023 circuit module, an EV2201 PC Interface Board for Gas Gauge Evaluation, a PC serial cable, and Windows-based PC software.

PCB design board Texas Instruments BQ2023EVM-001 on eBay PCB design board Texas Instruments BQ2023EVM-001 on Amazon

 
 

PCB design board Texas Instruments TPS62239EVM-574

The TPS62239EVM-574 is a fully assembled and tested evaluation module with three independent circuits. CKT1 will demonstrate the TPS622311 (1.1V), CKT2 will demonstrate the TPS62235 (1.2V), and CKT3 will demonstrate the TPS62239 (1.0V).

PCB design board Texas Instruments TPS62239EVM-574 on eBay PCB design board Texas Instruments TPS62239EVM-574 on Amazon

 
 

PCB design board Texas Instruments BQ24314AEVM

The bq2430x/1x/8x evaluation module is a complete charger module for evaluating a charger front-end protection and charger solution using the bq2430x/1x/8x and bq24080 devices. It is designed to deliver up to 200 mA (bq2430x) or 700 mA (bq2431x/8x) of charge current to Li-ion or Li-polymer applications. The charger front-end protection current is designed to 300 mA (bq2430x) or 1000 mA (bq2431x) or no limit (bq2438x).

PCB design board Texas Instruments BQ24314AEVM on eBay PCB design board Texas Instruments BQ24314AEVM on Amazon

 
 

PCB design board Texas Instruments TPS55065EVM

The Texas Instruments TPS55065EVM evaluation module (EVM) helps designers evaluate the operation and performance of the TPS55065 Switch Mode Power Supply - Buck / Boost Regulator. The EVM contains one DC/DC converter.

PCB design board Texas Instruments TPS55065EVM on eBay PCB design board Texas Instruments TPS55065EVM on Amazon




Copyright © Bargainplace.uk Inc. All Rights Reserved. In association with Bargainplace.co.uk