The TPA3124D2 evaluation module (EVM) consists of a single 15-W, class-D, stereo audio power amplifier complete with a small number of external components mounted on a printed-circuit board that can be used to directly drive speakers with an external analog audio source as the input.
Bargain Price: £115.00
The LM2833Z LLP Demo Board is designed to demonstrate the capabilities of the LM2833Z 3MHz switching regulator in the LLP-10 package.
This EVM features the DAC7741 digital-to-analog converter. The DAC7741EVM is a simple evaluation module designed for a quick and easy way to evaluate the functionality of the high-resolution, single-channel, parallel input DAC. This EVM features a parallel interface to communicate to any host processor base system.
The TPS51610EVM-593 evaluation module (EVM) is a single-phase, D-CAP+™ synchronous, buck converter providing 7-bit VID with 0.3 V to 1.5-V output range at up to 5 A from a 12-V input bus. The EVM uses the TPS51610 synchronous buck controller with selectable 200/300/400/500-kHz switching frequency.
The TXB0304 is a 4-bit voltage level translator for push-pull applications. The A port is designed to track VCCA. VCCA accepts any supply voltage from 0.9 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 0.9 V to 3.6 V. This allows for low-voltage bidirectional translation anywhere between the 0.9-V and 3.6-V voltage nodes.
The TPS92690EVM evaluation module is a constant current LED driver that can support applications up to 35W (35V at 1A). The LED current is pre-set at 500mA and the output voltage range is 20V to 35V. The input voltage range for this design is 8V to 19V which is typical for automotive applications as well as common off the shelf AC-DC power supplies.
The ADS5281EVM provides a platform for evaluating the eight-channel ADS5281 analog-to-digital converter (ADC) under various signal, reference, and supply conditions. The EVM provides an external SMA connector for eight analog inputs to the ADC and the input of the ADC clock. The ADC can be clocked using either a single-ended or differential clock, and provisions are made on the EVM to allow users to evaluate the ADC using a single-ended PECL clock, or a differential transformer-coupled clock.
The TPA2005D1 is a 1-W high efficiency filter-free class-D audio power amplifier in a MicroStar™ BGA package that requires only three external components. It is ideal for small battery operated electronics including wireless or cellular handsets, personal digital assistants (PDAs), and voice recorders.
The TPS2042BEVM-293 is an evaluation module EVM for the Texas Instruments family of two-channel, current limited, power-distribution switches. This EVM operates over a 2.7 V to 5.5 V range and provides a continuous output current of up to 1.5 A. Test points provide convenient access to all critical node voltages.
The TPS40322EVM-679 evaluation module (EVM) is a fully assembled and tested circuit for evaluating the TPS40322 Dual Output or Two-phase Synchronous Buck Controller. The EVM is designed to use a regulated 8.0Vdc to 15.0Vdc bus to produce two high current, regulated outputs, one at 1.2Vdc and the other at 1.8Vdc. Both outputs are capable of sourcing up to 10A of load current.
The TPS92001EVM-628 and TPS92001EVM-645 are fully assembled and tested circuits that helps designers evaluate the TPS92001 General Purpose PWM Controller with 10 V Turn-on Threshold for LED Lighting. The TPS92001EVM-628 is a constant current dimmable LED