PCB design board Texas Instruments TPA6012A4PWPEVM Stockists

TPA6012A4 evaluation module (EVM) demonstrates the performance of TPA6012A4. TPA6012A4 is a 3-W stereo Class-AB amplifier with 32-steps DC volume control. This EVM is a stand-alone audio board that can allow designers to evaluate the device’s sound quality.


Bargain Price: £110.00

PCB design board Texas Instruments TPA6012A4PWPEVM Deals on eBay PCB design board Texas Instruments TPA6012A4PWPEVM Deals on Amazon
StockistProductPrice 
BargainplacePCB design board Texas Instruments TPA6012A4PWPEVM£110.00Visit Store


PCB design board Texas Instruments TPA6012A4PWPEVM Related Products:

 
 

PCB design board Texas Instruments REG710EVM-33

The REG710EVM-33 is an evaluation tool for the 30mA buck-boost charge pump in SOT23-5 package. With an input voltage in the range of 1.8V to 5.5V, it delivers a regulated output voltage of 3.3V with up to 30mA of output current.

PCB design board Texas Instruments REG710EVM-33 on eBay PCB design board Texas Instruments REG710EVM-33 on Amazon

 
 

PCB design board Texas Instruments TPS2046BEVM-293

The TPS2046BEVM-293 is an evaluation module (EVM) for the Texas Instruments family of two-channel, current-limited, power-distribution switches. These EVMs operate over a 2.7 V to 5.5 V range and provide a continuous output current of up to 1.5 A. Test points provide convenient access to all critical node voltages.

PCB design board Texas Instruments TPS2046BEVM-293 on eBay PCB design board Texas Instruments TPS2046BEVM-293 on Amazon

 
 

PCB design board Texas Instruments TPS65270EVM

The TPS65270EVM evaluation module is designed to provide access to the features of the TPS65270. The TPS65270 PMIC is designed to provide 2-A and 3-A continuous currents with an operational range of 4.5 V to 16 V and an externally set switching frequency ranging from 300 kHz to 1.4 MHz. When the PMIC is not fully loaded, Buck1 can be loaded to 2.5 A and Buck2 to 3.5 A

PCB design board Texas Instruments TPS65270EVM on eBay PCB design board Texas Instruments TPS65270EVM on Amazon

 
 

PCB design board Texas Instruments ISO1176TEVM-433

The smaller EVM version shows the customer the space required for their design. This circuit provides an isolated, 40 Mbps, 3.3V to 5V Profibus interface using the ISO1176T, isolated Profibus transceiver and the TPS high accuracy linear regulator. The circuit achieves signal and power isolation and at the same time decrease board space and power consumption.

PCB design board Texas Instruments ISO1176TEVM-433 on eBay PCB design board Texas Instruments ISO1176TEVM-433 on Amazon

 
 

PCB design board Texas Instruments TPS2064EVM-296

The TPS2064EVM-296 is an evaluation module (EVM) for the Texas Instruments family of two-channel parent-limited, power-distribution switches. This EVM operates over a 2.7 V to 5.5 V range and provides a continuous output current of up to 1.5 A. Test points provide convenient access to all critical note voltages.

PCB design board Texas Instruments TPS2064EVM-296 on eBay PCB design board Texas Instruments TPS2064EVM-296 on Amazon

 
 

PCB design board Texas Instruments ADS58H43EVM

The ADS58H43EVM is a circuit board that allows designers to evaluate the performance of Texas Instruments ADS58H43, a quad-channel, 14-bit telecommunications analog-to-digital converter (ADC) operating at sampling rates of up to 250 MSPS. Designed for low-power consumption and high spurious free dynamic range (SFDR), the ADS58H43 has low-noise performance and outstanding SFDR over a large input-frequency range. The four ADC channels are separated into two blocks with two ADCs each. Each block can individually be configured into three different operating modes: 11-bit Operating mode, 11-bit SNRBoost3G+ mode, 14-bit High Resolution Burst mode.

PCB design board Texas Instruments ADS58H43EVM on eBay PCB design board Texas Instruments ADS58H43EVM on Amazon

 
 

PCB design board Texas Instruments TPS61080EVM-147

This TPS6108xEVM-147 uses either a TPS61080 or TPS61081 boost converter to step up 2.5 V to 6 V input voltages to 12 V. The goal of the EVM is to facilitate evaluation of the TPS61081 power supply solution. The EVM uses the TPS61080 or TPS61081 adjustable

PCB design board Texas Instruments TPS61080EVM-147 on eBay PCB design board Texas Instruments TPS61080EVM-147 on Amazon

 
 

PCB design board Texas Instruments CDCLVP2104EVM

The CDCLVP2104 is a high-performance, low additive phase noise clock buffer. It has two universal input buffers that support either single-ended or differential clock inputs. Each input feeds a bank of four LVPECL outputs. The device also features on-chip bias generators that can provide the LVPECL common-mode voltage to the device inputs.

PCB design board Texas Instruments CDCLVP2104EVM on eBay PCB design board Texas Instruments CDCLVP2104EVM on Amazon

 
 

PCB design board Texas Instruments TPS2064CDGNEVM-015

The TPS2064CDGNEVM-015 evaluation module (EVM) is a fully assembled and tested circuit for evaluating the TPS2064CDGN Dual Channel, Current-Limited, Power-Distribution Switch. The EVM contains input and output connectors as well as control jumpers to ease evaluation of device features.

PCB design board Texas Instruments TPS2064CDGNEVM-015 on eBay PCB design board Texas Instruments TPS2064CDGNEVM-015 on Amazon

 
 

PCB design board Texas Instruments OPA836IDBVEVM

The OPA835IDBVEVM and OPA836IDBVEVM are designed to quickly demonstrate the functionality and versatility of the amplifier(s). The EVM is ready to connect to power, signal source, and test instruments through the use of on-board connectors. The default amplifier configuration is non-inverting gain of 2 configuration and split supply. It can be easily configured for other gains, and single supply operation.

PCB design board Texas Instruments OPA836IDBVEVM on eBay PCB design board Texas Instruments OPA836IDBVEVM on Amazon




Copyright © Bargainplace.uk Inc. All Rights Reserved. In association with Bargainplace.co.uk