The Texas Instruments TLV117125EVM-097 Evaluation Module (EVM) demonstrates the proper operation of the TLV1117125 1A, Positive Fixed Voltage, Low-Dropout Linear Regulator. The EVM is a fully assembled, stand alone evaluation module. It contains a low-dropout regulator IC for positive fixed voltage regulation at 1A, input and output capacitors for stable operation, and header connectors for easy connection to external test and application circuitry.
The PCM2706EVM-U connects to a USB port of a PC. The USB interface provides power, control and streaming audio data to the EVM.
The LM5576 evaluation board is designed to provide the design engineer with a fully functional power converter based on Emulated Current Mode Control to evaluate the LM5576 regulator IC. The evaluation board provides a 5V output with a 3A current capability. The ultra-wide input voltage ranges from 7V to 75V. The design operates at 300kHz, a good compromise between conversion efficiency and solution size. The printed circuit board consists of 2 layers of 2 ounce copper on FR4 material with a thickness of 0.06 inches.
The TAS5162DDV6EVM PurePath Digital™ customer evaluation module demonstrates the integrated circuits TAS5162DDV and TAS5086DBT from Texas The TAS5162DDV is a high-performance, integrated stereo digital amplifier power stage designed to drive 6-Ω speakers at up to 210 W per channel. The device incorporates PurePath Digital™ technology and is designed to be used with PurePath Digital™ modulators.Instruments (TI).
The INA219EVM key hardware consists of two boards, INA219 Test Board and USB DIG Platform. The INA219 Test Board contains the INA209, terminal strips for external connections, and several jumpers for device configuration. The USB DIG Platform contains an 8052 microcontroller with a built in USB interface.
The LMP8278Q Evaluation Board is designed to evaluate the LMP8278Q current sense amplifier.
The Texas Instruments LM3447-A19-120VEVM evaluation module (EVM) helps designers evaluate the performance of the LM3447 PFC Flyback Controller for LED Lighting. The EVM is a primary-side power regulated PFC controller used for commercial and residential phase-cut dimmer compatible LED lamp drivers. It uses fixed frequency valley switching operation, resulting in discontinuous current operation.
The ADS833xEVM features the ADS8331 or ADS8332 analog to digital converter. The EVM provides a quick and easy way to evaluate the functionality and performance of this low power, high resolution, 16-bit Analog to Digital Converter (ADC). The EVM provides a serial interface header to easily attach to any host microprocessor or TI DSP base system
The TAS5711 evaluation module demonstrates the TAS5711 device from Texas Instruments. The TAS5711 combines a high-performance PWM processor with a class-D audio power amplifier. This EVM can be configured with two single-ended speakers with a BTL subwoofers (2.1) or two bridge-tied speakers (BTL) (2.0). For detailed information about the TAS5711 device, review the device data sheet (SLOS600).
The -48 V TPS2391 hot swap EVM contains all the components needed to implement a complete telecom hot swap interface. In addition, it contains some additional components and PCB patterns to facilitate evaluation of the device.