PCB design board Texas Instruments TPA6138A2EVM Stockists

The TPA6138A2EVM customer evaluation module (EVM) demonstrates the capabilities and operation of the TPA6138A2PW integrated circuit from Texas Instruments. The TPA6138A2PW is a 25mW Pop-Free stereo Head Phone driver designed to replace headphone circuit based on Op amps and passives. The TPA6138A2 doesn’t require a power supply greater than 3.3V to generate its 25mW output, nor does it require a split rail power supply.


Bargain Price: £140.00

PCB design board Texas Instruments TPA6138A2EVM Deals on eBay PCB design board Texas Instruments TPA6138A2EVM Deals on Amazon
StockistProductPrice 
BargainplacePCB design board Texas Instruments TPA6138A2EVM£140.00Visit Store


PCB design board Texas Instruments TPA6138A2EVM Related Products:

 
 

PCB design board Texas Instruments PGA450Q1EVM

The PGA450-Q1 evaluation module is to evaluate Ultrasonic Sensor product for distance measurement used in automotive park assist and blind spot detection.

PCB design board Texas Instruments PGA450Q1EVM on eBay PCB design board Texas Instruments PGA450Q1EVM on Amazon

 
 

PCB design board Texas Instruments BQ24192EVM-021

The BQ24192EVM-021 evaluation module (EVM) is a complete charger module for evaluating an I²C-controlled single NVDC-1 charge using the BQ2419x devices.

PCB design board Texas Instruments BQ24192EVM-021 on eBay PCB design board Texas Instruments BQ24192EVM-021 on Amazon

 
 

PCB design board Texas Instruments TLK1221EVM

The TLK1221 gigabit Ethernet transceiver provides for high-speed full-duplex point-to-point data transmissions. These devices are based on the timing requirements of the 10-bit interface specification by the IEEE 802.3 Gigabit Ethernet specification. The TLK1221 supports data rates from 0.6 Gbps through 1.3 Gbps.

PCB design board Texas Instruments TLK1221EVM on eBay PCB design board Texas Instruments TLK1221EVM on Amazon

 
 

PCB design board Texas Instruments PGA112EVM-B

The PGA112EVM is an evaluation module that is used to fully evaluate the PGA112 programmable gain amplifier. The PGA112EVM consists of two printed circuit boards (PCBs). One board (the SM-USB-DIG Platform) generates the digital signals required to communicate with the PGA112. The second board is the PGA112EVM Target Board.

PCB design board Texas Instruments PGA112EVM-B on eBay PCB design board Texas Instruments PGA112EVM-B on Amazon

 
 

PCB design board Texas Instruments LM5018ISOEVAL/NOPB

An isolated bias supply is implemented in this evaluation board with the LM5018 Constant-On-Time (COT) regulator. The LM5018 regulator integrates both the high and low side power switches essential for creating an isolated buck converter.

PCB design board Texas Instruments LM5018ISOEVAL/NOPB on eBay PCB design board Texas Instruments LM5018ISOEVAL/NOPB on Amazon

 
 

PCB design board Texas Instruments DAC8806EVM

TheDAC8806EVM is a full featured evaluation board featuring either the DAC8806 or DAC8820. These devices are 14-bit and 16-bit, multiplying DACs with a microprocessor and TMS320 DSP-compatible parallel interface. The data bits are double-buffered so that the output can be updated asynchronously using the LDAC pin. Developed for a wide range of supply voltages, these DACs can be operated from 2.7 V to 5.5 V. The EVM ships with either the DAC8806 or DAC8820 device installed.

PCB design board Texas Instruments DAC8806EVM on eBay PCB design board Texas Instruments DAC8806EVM on Amazon

 
 

PCB design board Texas Instruments TPS51116EVM-001

The TPS51116EVM evaluation module (EVM) is a dual-output converter for DDR and DDRII memory modules. It uses a 10 A synchronous buck converter to provide the core voltage (VDDQ) for DDR memory modules. The EVM is designed to use a 4.5 V to 28 V supply voltage and a 4.75 V to 5.25 V controller bias supply.

PCB design board Texas Instruments TPS51116EVM-001 on eBay PCB design board Texas Instruments TPS51116EVM-001 on Amazon

 
 

PCB design board Texas Instruments TPS61054EVM-273

The TPS61054EVM-273 facilitates evaluation of the TPS61054 high power white LED driver, 2 MHz synchronous boost converter IC in the QRN (DRV) package.

PCB design board Texas Instruments TPS61054EVM-273 on eBay PCB design board Texas Instruments TPS61054EVM-273 on Amazon

 
 

PCB design board Texas Instruments TLV320AIC1103EVM-K

The TLV320AIC11xxEVM-K is a complete evaluation/demonstration kit, which includes a USB-based motherboard called the USB-MODEVM Interface board and evaluation software for use with a personal computer running Microsoft Windows® XP operating systems only. Provisions are made for connecting all audio inputs and outputs either from the modular connectors or with on-board terminals and external microphone jack. An on-board electric microphone is also provided.

PCB design board Texas Instruments TLV320AIC1103EVM-K on eBay PCB design board Texas Instruments TLV320AIC1103EVM-K on Amazon

 
 

PCB design board Texas Instruments TMDSSOLARPEXPKIT

The Piccolo F28035 based solar explorer kit is intended to give designers the opportunity to evaluate different power stages used in solar applications in a safe, low voltage environment. This kit also offers designers of single panel off-grid applications such as lighting or motor control systems a robust development platform to start from by utilizing the 36VDC intermediate bus. All of the primary application power stages are controlled with a single C2000 MCU, including a single switch boost stage for maximum power point tracking, a SEPIC battery charging stage, and a grid-tie-capable DC/AC inverter stage capable of outputting 24VAC.

PCB design board Texas Instruments TMDSSOLARPEXPKIT on eBay PCB design board Texas Instruments TMDSSOLARPEXPKIT on Amazon




Copyright © Bargainplace.uk Inc. All Rights Reserved. In association with Bargainplace.co.uk