The TPS2041BEVM provides a means for the user to quickly evaluate the functionality and electrical performance of the TPS2041B. All inputs and outputs are brought out to test points for control and monitoring. All passive components are included on the EVM for device operation.
Bargain Price: £55.99
The TAS5710 evaluation module (EVM) demonstrates the TAS5710 device from Texas Instruments. The TAS5710EVM demonstrates a high-performance 20-W digital-input audio power amplifier. This EVM can be configured with two bridge-tied loads (BTL).
The Texas Instruments TPS650231EVM-664 is an integrated power management integrated circuit (IC) for applications that are powered with one Li-ion or Li-polymer cell and require multiple power rails. The TPS650231 contains three highly efficient switching step-down converters, two LDOs, and additional status and I/O pins. The device is controlled via an I2C interface (HPA172)
The bq24315 evaluation module is a complete charger module for evaluating a charger front-end protection and charger solution using the bq24315 and bq24080 devices. It is designed to deliver up to 700 mA of charge current to Li-ion or Li-polymer applications. The charger front-end protection current is designed to 1000 mA.
This EVM features the DAC8811 multiplying digital-to-analog converter (MDAC). It provides a quick and easy way to evaluate the functionality and performance of the high-resolution serial input MDAC. The EVM provides a serial interface header to easily attach to any host microprocessor or TI TMS320 DSP family base system for communications.
The PCM2906CEVM-U is an evaluation board for Texas Instruments' newly developed USB interface codec. The PCM2906CEVM-U includes a PCM2906C device, a bus-powered (500 mA) USB codec with an S/PDIF interface. The evaluation board also includes operational amplifiers for line input/output buffers, a 3.3-V regulator, and a USB connector.
The demo board included in this shipment uses the LM2735X 1.6MHz DC-DC switching regulator that converts 3V to 5.5V input to 12V output for up to 500mA load current depending on Vin. This is a 2-layer board using the bottom layer as a Ground plane.
The TPS60251EVM-192 is an evaluation module for the TPS60251 high efficiency charge pump DC/DC converter for WLED drivers. The TPS60250 uses a dual mode load switch 1X and 1.5X conversion to maximize efficiency. It drives up to five white LEDs in the main
The Texas Instruments TPS7A7001EVM-065 evaluation module (EVM) and reference design helps designers evaluate the performance of the TPS7A7001 Very Low Input, 2A Low-Dropout Linear Regulator with Enable. The EVM is a stand alone evaluation module containing a low dropout regulator IC for adjustable voltage regulation at 2A, input and output capacitors for stable operation and header-connectors for easy connection to external test and application circuitry.
The LMX2541 Evaluation Board simplifies the evaluation of the LMX2541 device. There is a different evaluation board for each option of the LMX2541 device, but they all use the same instructions and software.
The DS25BR100EVK is an evaluation kit designed for demonstrating performance of the 3.125 Gbps LVDS Single Channel Buffers with Transmit Pre-Emphasis (PE) and Receive Equalization (EQ) family (DS25BR100, DS25BR110 and DS25BR120). The evaluation kit provides all three devices on a single board and three FR4 striplines (14 (~35), 28 (~75) and 42 (~105) inches (cm) in length) for exercising devices’ signal conditioning features (pre-emphasis and equalization).