The TPS23756EVM contains evaluation and reference circuitry for the TPS23756. The TPS23756 integrates a powered-device (PD) controller and power-supply controller targeted at high-power, wide input range, isolated converter topologies. The TPS23756 is compliant with the IEEE 802.3at Power over Ethernet (PoE) standard.
Bargain Price: £59.99
The TPS92311A19230VEVM evaluation module is a constant current output LED driver supporting 5W-8W applications. The design focuses on applications that require small form factor and minimal number of external components. The actual PCB dimension of the module is only 22mm x 55mm x 19mm (L x W x H). The module can work with AC line input from 90 to 132VRMS or 180 to 264VRMS, based on the bill of materials.
The TSW2110EVM is a very clean 10 MHz source designed for the purposes of providing an input signal for testing TI ADC devices. The EVM includes a 10MHz crystal oscillator, an amplifier and a 10MHz Crystal filter with 16kHz band pass response. The output of the TSW2110EVM is set to about 10dBm, approximately 2Vpp, with typical harmonic performance greater than 80dBc. This is the appropriate peak to peak swing required by most TI ADCs.
Evaluation Module for bq24600/bq24620/bq24640. the bq24600 is a highly integrated Li-ion or Li-polymer switch-mode battery charge controller. The bq24620 is highly integrated switch-mode battery charge controller designed specifically to charge Lithium Phosphate battery chemistries.
The TAS5709EVM demonstrates a high-performance 20-W digital-input audio power amplifier. This EVM can be configured with two bridge-tied loads (BTL). For detailed information about the TAS5709 device, review the device data sheet (SLOS599).
The THS7374EVM is designed to quickly and easily demonstrate the functionality and versatility of the device. The EVM is ready to connect to power, signal source, and test instruments through the use of on-board connectors. The THS7374EVM is configured with 75-ohm input and output signal terminations.
The ADS7888EVM is a full-featured reference design, prototype, and software platform for ADS7888 IC. The reference design feature contains essential circuitry to show case the A/D converter. It gives the ability to change the input components to use different input frequencies
The SIMPLE SWITCHER power module evaluation board is optimized for peak performance and increased flexibility. By incorporating additional ceramic and an aluminum filter capacitor, the power module EVAL board demonstrates the low output ripple, fast transient response, and low conducted and radiated EMI performance of the device. Adjusting the output voltage, optimizing the control loop circuitry, and fine-tuning the filter capacitance is ease, with convenient size and placement of the passive components on the board. Finally, the excellent thermal performance of the power modules is enhanced using a 4-layer 1oz copper PCB.
The TPS54980 tracking dc/dc converter is designed to provide accurate power sequencing in applications where two or more voltages are required for a load. These types of applications include core and I/O power supplies for microprosessors, DSPs, and FPGAs. Typically, some specific relation between the core and I/O supply voltages has to be provided during the power up and power down sequences. The TPS54980 tracking dc/dc converter is capable of direct tracking, ratiometric tracking, and voltage sequencing with a second power source.
The TPS53126EVM-600 evaluation module is a fully assembled and tested circuit for evaluating the TPS53126 Dual Synchronous Step-Down Controller. The evaluation module converts 12V (8V - 22V) to 1.05V @ 4A and 1.8V @ 4A.
The TSC2017EVM-PDK is a complete evaluation/demonstration kit for the TSC2017 4-wire, resistive touch screen controller (TSC), which can be connected to a PC through a USB cable and controlled by PC GUI software. The TSC2017EVM-PDK includes (1) a TSC2017EVM, (2) a USB-MODEVM, and (3) a CD-ROM with evaluation software installer for the PC and related documentation.