PCB design board Texas Instruments TPS2420EVM-01 Stockists

The TPS2420EVM-01 is a 3 V to 18 V module using the TPS2420 hot swap controller with integrated MOSFET. At power on, the output is power limited to control inrush current and protect the MOSFET. On an over-current condition, the controller interrupts power to the load at high speed and signals load status.


Bargain Price: £68.99

PCB design board Texas Instruments TPS2420EVM-01 Deals on eBay PCB design board Texas Instruments TPS2420EVM-01 Deals on Amazon
StockistProductPrice 
BargainplacePCB design board Texas Instruments TPS2420EVM-01£68.99Visit Store


PCB design board Texas Instruments TPS2420EVM-01 Related Products:

 
 

PCB design board Texas Instruments TPL0401EVM

The TPL0401 is an I²C bus controlled, single channel, linear-taper digital potentiometer with 128 wiper positions. TPL0401A/B have an end-to-end resistance of 10k ohms and the low terminal internally connected to ground. The position of the wiper can be adjusted using an I²C interface. The TPL0401 is available in a 6-pin SC-70 package with a specified temperature range of -40°C to +125°C. The part has a 10k end-to-end resistance and can operate with a supply voltage range of 2.7V to 5.5V.

PCB design board Texas Instruments TPL0401EVM on eBay PCB design board Texas Instruments TPL0401EVM on Amazon

 
 

PCB design board Texas Instruments LP38513TJ-ADJEV

LP38513-ADJ 3A Fast-Transient Response Adjustable Low-Dropout Linear Voltage Regulator Evaluation Board

PCB design board Texas Instruments LP38513TJ-ADJEV on eBay PCB design board Texas Instruments LP38513TJ-ADJEV on Amazon

 
 

PCB design board Texas Instruments BQ24055EVM

The bq2405x series of devices are highly integrated Li-ion linear chargers devices targeted at space-limited portable applications. The devices operate from either a USB port or AC adapter. The bq2405x has a single power output that charges the battery.

PCB design board Texas Instruments BQ24055EVM on eBay PCB design board Texas Instruments BQ24055EVM on Amazon

 
 

PCB design board Texas Instruments TPS650006EVM-585

The TPS650006EVM-585 Evaluation Module is a fully assembled and tested circuit for evaluating the TPS650006 power management IC, which combines a single step-down converter with two low dropout regulators.

PCB design board Texas Instruments TPS650006EVM-585 on eBay PCB design board Texas Instruments TPS650006EVM-585 on Amazon

 
 

PCB design board Texas Instruments BQ24314EVM-251

The BQ2431x evaluation module is a complete charger module for evaluating a charger front-end protection and charger solution using the BQ2431x and BQ24080 devices. It is designed to deliver up to 700 mA of charge current to Li-ion or Li-polymer applications. The charger front-end protection current is designed to 1000 mA.

PCB design board Texas Instruments BQ24314EVM-251 on eBay PCB design board Texas Instruments BQ24314EVM-251 on Amazon

 
 

PCB design board Texas Instruments BQ24087EVM

The bq24085/6/7 evaluation module (EVM) provides a convenient method for evaluating the performance of a charge management solution for portable applications using the bq24085/6/7 product family. The charger is designed to deliver up to 750 mA of continuous charge current for single-cell Li-Ion or Li-polymer applications using a DC power supply. The bq24085/6/7 series are highly integrated Li-Ion and Li-polymer linear chargers, targeted at space-limited portable applications.

PCB design board Texas Instruments BQ24087EVM on eBay PCB design board Texas Instruments BQ24087EVM on Amazon

 
 

PCB design board Texas Instruments LM2833XSDEVAL

The LM2833X LLP Demo Board is designed to demonstrate the capabilities of the LM2833X 1.5MHz switching regulator in the LLP-10 package.

PCB design board Texas Instruments LM2833XSDEVAL on eBay PCB design board Texas Instruments LM2833XSDEVAL on Amazon

 
 

PCB design board Texas Instruments TPS2031EVM-290

The TPS2031EVM-290 is an evaluation module for the Texas Instruments family of single-channel, current limited, power distribution switches. These EVMs operate over a 2.7 V to 5.5 V range and provide a continuous output current of up to 2 A. Test points provide convenient access to all critical node voltages.

PCB design board Texas Instruments TPS2031EVM-290 on eBay PCB design board Texas Instruments TPS2031EVM-290 on Amazon

 
 

PCB (unequipped) Texas Instruments DEM-OPA-MSOP-1A

The DEM-OPA-MSOP-1A demonstration fixture helps designers evaluate the operation and performance of TI's single, wideband DC restoration circuit. This unpopulated PC board (PCB) is compatible with the OPA615 offered in the 10-lead MSOP (DGS) package.

PCB (unequipped) Texas Instruments DEM-OPA-MSOP-1A on eBay PCB (unequipped) Texas Instruments DEM-OPA-MSOP-1A on Amazon

 
 

PCB design board Texas Instruments TPS40180EVM

The TPS40180EVM evaluation module (EVM) is a stackable single phase synchronous buck converter and is designed to demonstrate the TPS40180 in a typical regulated bus to low-voltage application while providing a number of test points to evaluate the performance of the TPS40180 in a given application. The EVM delivers 1.5 V at 20 A. Each EVM is stackable with another EVM to provide higher output current. The module uses the TPS40180 Synchronous Buck Controller. TPS40180EVM is designed to use a regulated 10.8 V to 13.2 V bus to produce a high current, regulated output. The output is capable of supplying up to 20 A of load current.

PCB design board Texas Instruments TPS40180EVM on eBay PCB design board Texas Instruments TPS40180EVM on Amazon




Copyright © Bargainplace.uk Inc. All Rights Reserved. In association with Bargainplace.co.uk