PCB design board Texas Instruments TPS2421-1EVM-02 Stockists

The TPS2421-1EVM-02 is a 3 V to 18 V module using the TPS2421-1 hot swap controller with integrated MOSFET. At power on, the output is power limited to control inrush current and protect the MOSFET. On an over-current condition, the controller interrupts power to the load at high speed and signals load status.


Bargain Price: £68.99

PCB design board Texas Instruments TPS2421-1EVM-02 Deals on eBay PCB design board Texas Instruments TPS2421-1EVM-02 Deals on Amazon
StockistProductPrice 
BargainplacePCB design board Texas Instruments TPS2421-1EVM-02£68.99Visit Store


PCB design board Texas Instruments TPS2421-1EVM-02 Related Products:

 
 

PCB design board Texas Instruments DAC8832EVM-PDK

The DAC8832EVM-PDK is a complete evaluation/demonstration kit, which combines an DAC8832EVM with the TMS32VC5509 based MMB0 motherboard for use with a personal computer. The MMB0 motherboard allows the DAC8832EVM to connect to a computer via a USB port. The DAC8832EVM-PDK is controlled by the DXP evaluation software using an initialization file which sets up the serial control to the device under test.

PCB design board Texas Instruments DAC8832EVM-PDK on eBay PCB design board Texas Instruments DAC8832EVM-PDK on Amazon

 
 

PCB design board Texas Instruments TPS7A4525EVM-385

The TPS7A4525EVM-385 facilitates evaluation of the TPS7A4525 1.5A Low-Noise, Fast-Transient-Response Low-Dropout Regulator. The EVM allows the user to apply different input voltage levels (2.5V to 20V) and different loads (0 to 1.5A) and check the regulated output voltage for stability.

PCB design board Texas Instruments TPS7A4525EVM-385 on eBay PCB design board Texas Instruments TPS7A4525EVM-385 on Amazon

 
 

PCB design board Texas Instruments DV2004L1

The DV2004L1 Development System provides a development environment for the bq2004 Fast-Charge IC. The DV2004L1 incorporates a bq2004 and a frequency-modulated linear regulator to provide fast charge control for 4 to 10 NiCd or NiMH cells.

PCB design board Texas Instruments DV2004L1 on eBay PCB design board Texas Instruments DV2004L1 on Amazon

 
 

PCB design board Texas Instruments TPS7A4501EVM-385

The TPS7A4501EVM-385 facilitates evaluation of the TPS7A4501 1.5A Low-Noise, Fast-Transient-Response Low-Dropout Regulator. The EVM allows the user to apply different input voltage levels (2.5V to 20V) and different loads (0 to 1.5A) and check the regulated output voltage for stability.

PCB design board Texas Instruments TPS7A4501EVM-385 on eBay PCB design board Texas Instruments TPS7A4501EVM-385 on Amazon

 
 

PCB design board Texas Instruments LMK04133EVAL/NOPB

The LMK04133 Evaluation Board simplifies evaluation of the LMK04131B Precision Clock Conditioner with Dual PLLs and Integrated VCO. Configuring and controlling the board is accomplished using Texas Instrument's CodeLoader software.

PCB design board Texas Instruments LMK04133EVAL/NOPB on eBay PCB design board Texas Instruments LMK04133EVAL/NOPB on Amazon

 
 

PCB design board Texas Instruments TPS2492EVM-001

The TPS2492EVM-001 is a fully assembled and tested circuit for evaluating the TPS2492 Positive High-Voltage Power-Limiting Hotswap Controller with Analog Current Monitor Output. The TPS2492EVM-001 accepts a 1VDC to 12VDC input and delivers a 12VDC, 1A maximum output with the Latch Off mode. The TPS2492EVM-001 can be configured for other operating voltage and current combinations.

PCB design board Texas Instruments TPS2492EVM-001 on eBay PCB design board Texas Instruments TPS2492EVM-001 on Amazon

 
 

PCB design board Texas Instruments TPS79501DRBEVM

The TPS79501DRBEVM is a fully assembled and tested circuit for evaluating the TPS79501 low-dropout (LDO), low-power linear voltage regulator in the DRB (3 x 3mm, SON-8) package.

PCB design board Texas Instruments TPS79501DRBEVM on eBay PCB design board Texas Instruments TPS79501DRBEVM on Amazon

 
 

PCB design board Texas Instruments LM5051MAEVAL/NOPB

The LM5051 evaluation board is designed to demonstrate the capabilities of the LM5051 OR-ing Diode Controller. One lowside N-channel power MOSFET is used per channel. The evaluation board is designed to highlight applications with a small solution size.

PCB design board Texas Instruments LM5051MAEVAL/NOPB on eBay PCB design board Texas Instruments LM5051MAEVAL/NOPB on Amazon

 
 

PCB design board Texas Instruments ADS8363EVM

The ADS8363EVM uses a circuit board designated ADS72-8363EVM. This EVM board will accept either the ADS7263 (12bit) or the ADS8363 (16bit) ADC. The evaluation board has two 1MSPS, 12-bit/16-bit serial output channels. The analog inputs can be configured as 4 pseudo-differential or 2 fully differential channel pairs.

PCB design board Texas Instruments ADS8363EVM on eBay PCB design board Texas Instruments ADS8363EVM on Amazon

 
 

PCB design board Texas Instruments TPS2024EVM-290

The TPS2024EVM-290 is an evaluation module for the Texas Instruments family of single-channel, current limited, power distribution switches. These EVMs operate over a 2.7 V to 5.5 V range and provide a continuous output current of up to 2 A. Test points provide convenient access to all critical node voltages.

PCB design board Texas Instruments TPS2024EVM-290 on eBay PCB design board Texas Instruments TPS2024EVM-290 on Amazon




Copyright © Bargainplace.uk Inc. All Rights Reserved. In association with Bargainplace.co.uk