The LM3561EVM is a complete demonstration system for the LM3561 600mA Single LED Driver. The LM3561EVM consists of an evaluation board, a USB Interface module, and downloadable software. Communication from PC to device is via the downloadable software and the included USB2ANY USB Interface Board. The evaluation board provides an on board high current white LED as well as test points for each input/output on the device.
The ADC12C105EB Design Kit (consisting of the ADC12C105 Evaluation Board and this Users Guide) are designed to ease evaluation and design-in of the Texas Instrument ADC12C105 12-bit Analog-to-Digital Converter, which can operate at speeds up to 105 MSPS. The evaluation board can be used in either of two modes. In the Manual mode suitable test equipment, such as a logic analyzer, can be used with the board to evaluate the ADC12C105's performance. In the Computer Mode this evaluation board is used with TI's WaveVision4 board to capture data and WaveVision software to analyze that data.
The TPS59611EVM-622 evaluation module (EVM) is a single phase, D-CAP+™ synchronous buck converter providing 7-bit VID with 0.85-V to 1.05-V output range at up to 25 A from a 12-V input bus. The EVM uses the TPS59611 synchronous buck controller with selectable 250/300/350/500-kHz switching frequency. TPS59611EVM-622 also uses the 5-mm-x-6-mm TI power block MOSFET (CSD86350Q5D) for high-power density and superior thermal performance.
The INA3221EVM is a platform for evaluating the performance of the INA3221 under various signal, shunt, and supply conditions.
Development kit type (category): PCB design board; MC layout: TI MSP430; Manufacturer: Texas Instruments; Series (Microcontroller): TI MSP430; Technology (Microcontroller): 16-bit MCU; Tool type: Development Kit; Type (manufacturer type): EZ430-CHRONOS-868
Evaluation Module for bq24600/bq24620/bq24640. the bq24600 is a highly integrated Li-ion or Li-polymer switch-mode battery charge controller. The bq24620 is highly integrated switch-mode battery charge controller designed specifically to charge Lithium Phosphate battery chemistries. The bq24640 is highly integrated super capacitor switch-mode charge controller.
CDCLVP2108EVM is the evaluation module for CDCLVP2108. The CDCLVP2108 is a highly versatile, low additive jitter buffer that integrates two channels of 1:8 LVPECL buffers with selectable LVPECL, LVDS, or LVCMOS inputs. It has a maximum clock frequency up to 2 GHz. The overall additive jitter performance is less than 0.1 ps, RMS from 10 kHz to 20 MHz, and overall output skew is as low as 30 ps, making the device a perfect choice for use in demanding applications.
The LMR12010 is a step down DC-DC regulator that operates at the following switching frequencies: the LMR12010X at 1.6MHz and the LMR12010Y at 3MHz. The demo board is configured to convert 5V input to 1.8V output at 1A load current using the Y version. The tiny low profile thin SOT23 package allows the design to use less than 1 square inch of board area.
The TPA2031D1 audio power amplifier evaluation module is a complete, low-power single-channel audio power amplifier. It consists of the TI TPA2031D1 2.5-W low-voltage Class-D audio power amplifier IC in a very small NanoFree™ WCSP package, along with a small number of other parts mounted on a circuit board that is approximately 1.25-inches square. Single in-line header pins are mounted to the underside of the module circuit board.
These wide range evaluation boards showcases the LM3429 NFET controller used with a buck or buck-boost current regulator. The evaluation board showcases most features of the LM3429 including PWM dimming, overvoltage protection and input under-voltage lock