PCB design board Texas Instruments TPS40040EVM-001 Stockists

The TPS40040EVM-001 evaluation module (EVM) is a synchronous buck converter providing a fixed 1.8 V output at up to 10 A from a 5 V input bus. The EVM is designed to start up from a single supply, so no additional bias voltage is required for startup. The module uses the TPS40040 reduced pin count, low-voltage, synchronous buck controller.


Bargain Price: £59.99

PCB design board Texas Instruments TPS40040EVM-001 Deals on eBay PCB design board Texas Instruments TPS40040EVM-001 Deals on Amazon
StockistProductPrice 
BargainplacePCB design board Texas Instruments TPS40040EVM-001£59.99Visit Store


PCB design board Texas Instruments TPS40040EVM-001 Related Products:

 
 

PCB design board Texas Instruments PCM5142EVM-U

The PCM5142EVM-U is a complete evaluation kit for use with a personal computer running the Microsoft Windows â„¢ operating system. This EVM can be used in conjunction with PurePathâ„¢ Studio to take advantage of the fixed-function processing and mini-DSP processing capabilities of the PCM5142 and PCM5141. The necessary evaluation software can be found online at the PCM5122 or PCM5141 Product Folder.

PCB design board Texas Instruments PCM5142EVM-U on eBay PCB design board Texas Instruments PCM5142EVM-U on Amazon

 
 

PCB design board Texas Instruments DRIVECABLE04EVK/NOPB

The DRIVECABLE04EVK is an evaluation kit designed for demonstrating performance of the DS30BA101 and DS30EA101, a cable extender chipset. It is optimized for sending binary data up to 3.125 Gbps signaling rates over long copper cables up to 100s of meters. The evaluation kit enables the chipset evaluation with 75-ohm coax cables.

PCB design board Texas Instruments DRIVECABLE04EVK/NOPB on eBay PCB design board Texas Instruments DRIVECABLE04EVK/NOPB on Amazon

 
 

PCB design board Texas Instruments SN65CML100EVM

The EVM allows evaluation of operation of the SN65LVDS100/101 or SN65CML100 high-speed differential translators/repeaters. Differential input signals (LVDS, LVPECL, CML, etc.) can be applied and the device output can be observed across on board terminations, or via direct connection to 50-ohm oscilloscope inputs. Single-ended LVPECL signals can also be applied by using the Vbb reference output voltage provided by either the SN65LVDS100/101 or SN65CML100 devices from TI.

PCB design board Texas Instruments SN65CML100EVM on eBay PCB design board Texas Instruments SN65CML100EVM on Amazon

 
 

PCB design board Texas Instruments TPS2543EVM-064

The Texas Instruments TPS2543EVM-064 evaluation module (EVM) helps designers evaluate the performance of the TPS2543 USB Charging Port Power Switch and Controller. The EVM contains input and output connectors. Jumper controls are also provided to ease evaluation of device features.

PCB design board Texas Instruments TPS2543EVM-064 on eBay PCB design board Texas Instruments TPS2543EVM-064 on Amazon

 
 

PCB design board Texas Instruments LM2731XEVAL/NOPB

LM2731X 1.6 MHz Boost Converter With 22V Internal FET Switch

PCB design board Texas Instruments LM2731XEVAL/NOPB on eBay PCB design board Texas Instruments LM2731XEVAL/NOPB on Amazon

 
 

PCB design board Texas Instruments DS91C176EVK/NOPB

The DS91C176EVK consists of two RJ45 to SMA adapter boards developed to complement TI's evaluation boards for which evaluation with CAT5e cable assemblies is sometimes desirable (e.g. DriveCable02EVK, LVDS-18B-EVK, DS25BR100EVK, etc.).

PCB design board Texas Instruments DS91C176EVK/NOPB on eBay PCB design board Texas Instruments DS91C176EVK/NOPB on Amazon

 
 

PCB design board Texas Instruments TPA751EVM

A 700-mW bridge-tied load (BTL) mono amplifier with ultra-low supply current, active low shutdown current (ISD = 1.5 nA) and differential inputs. The TPA751 is characterized at 3.3 V and 5 V.

PCB design board Texas Instruments TPA751EVM on eBay PCB design board Texas Instruments TPA751EVM on Amazon

 
 

PCB design board Texas Instruments TPS65124EVM-076

The TPS65124EVM-076 is an evaluation tool for the TPS65124 multi-channel power supply for small form-factor TFT LCD displays. The evaluation module can accept input voltages in range of 2.5V to 5.5V and supplies Vmain = 5V, Vgh = 12V and Vgl = -12V to power a-Si or LTPS TFT displays. Other voltages can be adjusted by changing resistor feedback networks on the evaluation module. Additionally, the TPS65124 features user-programmable power-up/down sequencing and enable signals for Vgh and Vgl.

PCB design board Texas Instruments TPS65124EVM-076 on eBay PCB design board Texas Instruments TPS65124EVM-076 on Amazon

 
 

PCB design board Texas Instruments TPS65000EVM-469

The TPS65000EVM-469 facilitates evalvation of the TPS65000 power management IC for portable device applications. The TPS65000 contains one DC/DC switcher, 2 low-dropout (LDO) regulators, and a Spread Spectrum Clock (SSC) to supress EMI noise. It is powered from a 2V to 6V source.

PCB design board Texas Instruments TPS65000EVM-469 on eBay PCB design board Texas Instruments TPS65000EVM-469 on Amazon

 
 

PCB design board Texas Instruments TLV320AIC3106EVM-K

The TLV320AIC3106EVM-K is a combination of two boards the EVM and a PDK to allow operation with personal computors. The TLV320AIC3106EVM is an EVM manufactured in Texas Instruments modular EVM form factor. This evaluation module (EVM) is a complete stereo audio codec with several inputs and outputs, extensive audio routing, mixing, and effects capabilities.

PCB design board Texas Instruments TLV320AIC3106EVM-K on eBay PCB design board Texas Instruments TLV320AIC3106EVM-K on Amazon




Copyright © Bargainplace.uk Inc. All Rights Reserved. In association with Bargainplace.co.uk