The DV2054S2 Development System provides a development environment for the bq2054 Lithium Ion Fast-Charge IC. The DV2054S2 incorporates a bq2054 and a buck-type switch-mode regulator to provide fast charge control for 1 through 4 Li-Ion cells.
The SensorEmulatorEVM provides a complete system for strain and temperature emulation of voltage-excited bridge sensors. The SensorEmulatorEVM uses rotary selector switches and potentiometers to emulate the operation of a voltage-excited Wheatstone resistive bridge sensor at discrete operating points of strain and temperature. Once the sensor emulator has been programmed, it allows the user to cycle through a set of sensor output conditions very quickly.
The TPS659121 Evaluation Module (EVM) is designed to facilitate evaluation of the power management integrated circuit. The EVM allows for evaluation of the TPS659121 device which provides four configurable step-down converters with up to 2.5A output current for memory, processor core, I/O, or pre-regulation of LDOs. It also contains 10 LDO regulators for external usage which can be supplied from either a battery or a pre-regulated supply.
The TPA2015D1 is a mono 2.0-W Class-D audio amplifier with an integrated boost converter. The evaluation module comprises a TPA2015D1, a small number of external components, and input and output connectors to simplify interface to an audio source and speaker. The EVM features jumpers to easily select BatteryGuard inflection point and fixed-gain settings. The EVM supports filter-free operation, and includes an optional on-board R-C filter to reduce measurement error when testing Class-D performance.
The Texas Instruments TPS54494EVM-057 evaluation module (EVM) helps designers evaluate the performance of the TPS54494 4A Dual Channel Synchronous Step-Down Switcher with Integrated FET.
The DLP® LightCrafter™ 4500 development module provides a flexible light steering solution with high brightness and resolution for industrial, medical and scientific applications. DLP LightCrafter 4500 features the 0.45 WXGA chipset and offers a compelling combination of resolution, brightness, and programmability in a small form factor. Developers can easily create, store, and display high-speed pattern sequences through DLP LightCrafter 4500’s USB-based application programming interface (API) and easy-to-use graphical user interface (GUI).
The TPS2492EVM-003 is a fully assembled and tested circuit for evaluating the TPS2492 Positive High-Voltage Power-Limiting Hotswap Controller with Analog Current Monitor Output. The TPS2492EVM-003 accepts a 1VDC to 48VDC input and delivers a 48VDC, 1A maximum output with the Latch Off mode. The TPS2492EVM-003 can be configured for other operating voltage and current combinations.
The ADS8363EVM uses a circuit board designated ADS72-8363EVM. This EVM board will accept either the ADS7263 (12bit) or the ADS8363 (16bit) ADC. The evaluation board has two 1MSPS, 12-bit/16-bit serial output channels. The analog inputs can be configured as 4 pseudo-differential or 2 fully differential channel pairs.
The TPS74901EVM-210 facilitates evaluation of the TPS74901 low-dropout linear regulator IC. These regulators require a low-power bias voltage, VBIAS, and a power input voltage, VIN. The regulator is capable of providing output voltages down to 0.8 V, output currents up to 3 A and has an integrated supervisory circuit with open-drain output that goes to high impedance when the output voltage reaches regulation (power good or PG).
The TPS73401DRVEVM-527 facilitates evaluation of the TPS73401 single output, 250mA LDO in the DRV (2mm x 2mm SON) package.