PCB design board Texas Instruments TPS712XXEVM-050 Stockists

The Texas Instruments TPS712xxEVM-050 dual RF LDO evaluation module (EVM) helps designers evaluate the operation and performance of the TPS712xx family of devices. These devices are tailored to applications that need both high PSRR and low output noise.


Bargain Price: £12.99

PCB design board Texas Instruments TPS712XXEVM-050 Deals on eBay PCB design board Texas Instruments TPS712XXEVM-050 Deals on Amazon
StockistProductPrice 
BargainplacePCB design board Texas Instruments TPS712XXEVM-050£12.99Visit Store


PCB design board Texas Instruments TPS712XXEVM-050 Related Products:

 
 

PCB design board Texas Instruments SERDESUB-21USB/NOPB

The SERDESUB-21USB is an evaluation kit designed to demonstrate performance and capabilities of the DS90UB903Q and DS90UB904Q FPD-Link III Serializer/Deserializer chipset. The chipset enables transmission of a high-speed video data along with a low latency bidirectional control bus over a single twisted pair cable. The integrated control channel transfers data simultaneously over the same serial video link.

PCB design board Texas Instruments SERDESUB-21USB/NOPB on eBay PCB design board Texas Instruments SERDESUB-21USB/NOPB on Amazon

 
 

PCB design board Texas Instruments DRV8804EVM

The DRV8804 evaluation module consists of a quad low-side motor driver with serial control interface that can be used to drive a unipolar stepper motor, up to 4 DC motors or other loads like solenoids. With the DRV8804EVM, designers can quickly and easily evaluate the performance of DRV8804 motor driver in their specific application. This EVM comes with an on-board MSP430 microprocessor which has been pre-programmed for standalone operation. The regulated voltage for the MSP430 is provided by TPS7A4001.

PCB design board Texas Instruments DRV8804EVM on eBay PCB design board Texas Instruments DRV8804EVM on Amazon

 
 

PCB design board Texas Instruments PUREPATH-CMBEVM

The PurePath™ Console Motherboard EVM (PurePath-CMBEVM) is used as primary interface to TI’s Audio Products. It provides a seamless interface between the PurePath™ Console GUI running on your computer, and the device under evaluation.

PCB design board Texas Instruments PUREPATH-CMBEVM on eBay PCB design board Texas Instruments PUREPATH-CMBEVM on Amazon

 
 

PCB design board Texas Instruments DRV2667EVM-CT

The DRV2667 is a digitally controlled, high-voltage driver designed to control Piezo actuators with voltages between 40 Vpp and 200 Vpp. The DRV2667 eliminates many design complexities of driving Piezo by including an integrated 105 V boost converter and 200 Vpp differential output amplifier. In addition, the digital control interface (I²C) includes real-time waveform playback, a waveform generator, and embedded RAM for waveform storage.

PCB design board Texas Instruments DRV2667EVM-CT on eBay PCB design board Texas Instruments DRV2667EVM-CT on Amazon

 
 

PCB design board Texas Instruments BQ2023EVM-001

The bq2023EVM-001 is a complete evaluation system for the bq2023 FLASH based Battery Monitoring IC. The EVM includes one bq2023 circuit module, an EV2201 PC Interface Board for Gas Gauge Evaluation, a PC serial cable, and Windows-based PC software.

PCB design board Texas Instruments BQ2023EVM-001 on eBay PCB design board Texas Instruments BQ2023EVM-001 on Amazon

 
 

PCB design board Texas Instruments DS90UB913A-CXEVM

The Texas Instruments DS90UB913A_CXEVM evaluation module (EVM) helps system designers evaluate the operation and performance of the DS90UB913A-Q1 25MHz-100MHz FPD-Link III Serializer (SER). The device translates 10/12 bits of LVCMOS data into a high-speed serialized FPD-Link III interface transported over a single 50 ohm coax cable.

PCB design board Texas Instruments DS90UB913A-CXEVM on eBay PCB design board Texas Instruments DS90UB913A-CXEVM on Amazon

 
 

PCB design board Texas Instruments LMP8640HV-TEVAL/NOPB

The LMP8640HV-T Current Sense Evaluation Board is designed to evaluate the LMP8640HV-T, Precision Current Sensing Amplifier with fixed gain of 20V/V. This board show a typical configuration of a bidirectional current sense with two LMP8640HV-T parts mounted on the PCB together with the required de-coupling capacitor, power supply connections, Input and Output connectors.

PCB design board Texas Instruments LMP8640HV-TEVAL/NOPB on eBay PCB design board Texas Instruments LMP8640HV-TEVAL/NOPB on Amazon

 
 

PCB design board Texas Instruments TAS5613PHD2EVM

The TAS5611/13PHD2EVM PurePath™ Premier Pro customer evaluation module demonstrates the integrated circuit TAS5611 or TAS5613PHD from Texas Instruments (TI). The TAS5611 and TAS5613PHD is high-performance, integrated Stereo Feedback Analog-Input Digital Amplifier Power Stages designed to drive 4Ω speakers at up to 150W per channel for TAS5613PHD and 125W per channel for TAS5611PHD. This amplifier requires only a simple passive demodulation filter to deliver high-quality, high-efficiency audio amplification.

PCB design board Texas Instruments TAS5613PHD2EVM on eBay PCB design board Texas Instruments TAS5613PHD2EVM on Amazon

 
 

PCB design board Texas Instruments CDCE421AEVM

CDCE421AEVM is the evaluation module for CDCE421A. CDCE421A is a highly versatile,

PCB design board Texas Instruments CDCE421AEVM on eBay PCB design board Texas Instruments CDCE421AEVM on Amazon

 
 

PCB design board Texas Instruments LM5050MK-1EVAL/NOPB

The LM5050-1 evaluation board is designed to demonstrate the capabilities of the LM5050-1 OR-ing Diode Controller. One high side N-channel power MOSFET is used. The evaluation board is designed to highlight applications with a small solution size.

PCB design board Texas Instruments LM5050MK-1EVAL/NOPB on eBay PCB design board Texas Instruments LM5050MK-1EVAL/NOPB on Amazon




Copyright © Bargainplace.uk Inc. All Rights Reserved. In association with Bargainplace.co.uk