The TSC2101 is an advanced touch screen controller, which communicates to a host processor through an SPI serial interface. In addition, a mono-input/stereo-output audio codec is included in the TSC2101, and audio data is communicated to the device over an I2S bus. The TSC2101EVM accesses both of these buses through the use of a USB microcontroller, which provides a way to generate data for both buses from a PC running Windows 98SE, 2000, or XP.
Bargain Price: £145.00
The Tiva™ C Series TM4C129x Connected Development Kit is a versatile and feature-rich engineering platform that highlights the 120-MHz Tiva C Series TM4C129XNCZAD ARM® Cortex™-M4 based microcontroller, including an integrated 10/100 Ethernet MAC + PHY as well as many other key features.
The THS4140EVM is a good example of PCB design and layout for high-speed operational amplifier applications. It is a complete circuit for the high-speed operational amplifier. The EVM is made of the THS4140 high-speed operational amplifier, a number of passive components, and various features and footprints that enable the user to experiment, test, and verify various operational amplifier circuit implementations.
The TPS22933AEVM-005 evaluation module (EVM) is a fully assembled and tested circuit for evaluating the TPS22933A Small, Automatic Triple Load Switch with Low-Dropout Voltage Regulator. The EVM allows the user to apply different input voltages (2.5V-12.0V) to any of three inputs under different loading conditions (0-50mA) to the TPS22933A. Output, input and switching waveforms can be monitored on the EVM.
The TPS2420EVM-01 is a 3 V to 18 V module using the TPS2420 hot swap controller with integrated MOSFET. At power on, the output is power limited to control inrush current and protect the MOSFET. On an over-current condition, the controller interrupts power to the load at high speed and signals load status.
The Texas Instruments TPS54120EVM-103 evaluation module (EVM) helps designers evaluate the operation and performance of the TPS54120 Low-Noise, 1A Power Supply with Integrated DC-DC Converter and Low-Dropout Regulator. The EVM configuration contains all of the external components required for a low noise 1A solution with internal thermal and current limit shutdowns, power good output monitor, tracking and enabling/disabling circuitry.
The THS7320YHCEVM is designed to quickly and easily demonstrate the functionality and versatility of the device. The EVM is ready for power, signal source, and test instruments. The THS7320YHCEVM is configured with a 75 ohm input and output termination.
The PCM4202EVM provides a convenient platform for evaluating the performance and functionality of the PCM4202 device. The EVM has two differential analog input channels corresponding to Left and Right analog input channels. Each of these channels are buffered and filtered using a low noise input circuit, a Texas Instruments OPA1632 fully differential amplifier.
The Texas Instruments TPS7A6050EVM evaluation module (EVM) helps designers evaluate the operation and performance of the TPS7A6050-Q1 Low-Dropout Linear Regulator. The device offers low power consumption, stable operation when using low-ESR ceramic output capacitors and a Power-On Reset with programmable delay. The Board supports footprints for both package variants, D2PAK and DPAK. Replacing the device allows evaluation of the 3.3V-output variant TPS7A6033, and using the DELAY-jumper as an input, also TPS7A6133 and TPS7A6150 can be evaluated.
The Texas Instruments TPS43351EVM evaluation module (EVM) helps designers evaluate the operation and performance of the TPS43351 Low Iq, Dual Synchronous Buck Controller.
The TPA6211A1 is a 3.1-W mono fully differential amplifier designed to drive a speaker with at least 3-ohm impedance while comsuming less than 20mm2 total board space. The device operates from 2.5V to 5.5V while consuming only 4mA of quiescent current. The TPA6211A1 is available in a space-saving 3mm x 3mm QFN (Quad Flat No Lead) package and the 3mm x 5mm MSOP package.