PCB prototyping board Texas Instruments ADS8381EVM Stockists

The ADS8381EVM is designed for the prototyping and evaluation of the ADS8381 analog-to-digital converter(ADC), a high-resolution (18 bit), high speed, SAR device. The EVM uses a THS4031 amplifier (selected for its low noise),configured to allow the ADS8381 to operate at full 100KHz datasheet performance. The THS4031 stage has an input voltage offset adjustment designed with a single 10K potentiometer and a precision voltage source.


Bargain Price: £145.00

PCB prototyping board Texas Instruments ADS8381EVM Deals on eBay PCB prototyping board Texas Instruments ADS8381EVM Deals on Amazon
StockistProductPrice 
BargainplacePCB prototyping board Texas Instruments ADS8381EVM£145.00Visit Store


PCB prototyping board Texas Instruments ADS8381EVM Related Products:

 
 

PCB design board Texas Instruments BQ24165EVM-741

The bq24165/166/167 evaluation module is a complete charger module for evaluating a compact, flexible, high-efficiency, USB-friendly, switch-mode charge management solution for single-cell, Li-ion and Li-polymer batteries used in a wide range of portable applications. The bq24165/166/167 IC integrates a synchronous PWM controller, power MOSFETs, input current sensing, high-accuracy current and voltage regulation, charge termination and power path management into a chipscale package.

PCB design board Texas Instruments BQ24165EVM-741 on eBay PCB design board Texas Instruments BQ24165EVM-741 on Amazon

 
 

PCB design board Texas Instruments ADS7924EVM

The ADS7924EVM is an evaluation board for the ADS7924, a four-channel, 12-bit, analog-to-digital converter (ADC) with an I²C™ interface. The modular EVM uses the ADS7924 and minimal circuitry to demonstrate functionality for prototyping and part evaluation. The pins of the ADS7924 are accessible through various connections on the ADS7924EVM connectors

PCB design board Texas Instruments ADS7924EVM on eBay PCB design board Texas Instruments ADS7924EVM on Amazon

 
 

PCB design board Texas Instruments THS3201EVM

The THS3201EVM provides a platform for evaluating the THS3201 high-speed current-feedback amplifier. The user needs only power, input signal, and test instruments to operate the EVM. The gain can be changed by changing the feedback and gain resistors.

PCB design board Texas Instruments THS3201EVM on eBay PCB design board Texas Instruments THS3201EVM on Amazon

 
 

PCB design board Texas Instruments LM34904EVM/NOPB

The Texas Instruments LM34904EVM evaluation module (EVM) helps designers evaluate the performance of the LM34904 current limited power switch. The LM34904 is a 0.5A PFET switch used to control the input voltage of electronic devices. It is easily integrated into system designs that have a 2.8V to 5.3V voltage rail. Besides the 0.4U PFET switch, the LM34904 can be enabled or disabled by a logic signal.

PCB design board Texas Instruments LM34904EVM/NOPB on eBay PCB design board Texas Instruments LM34904EVM/NOPB on Amazon

 
 

PCB design board Texas Instruments AIC3262-STICKEVM

The TLV320AIC3262 Stick EVM is a small form factor evaluation module for the TLV320AIC3262 Audio Codec, which is a low power stereo codec with 3rd generation miniDSP, Integrated Class-D Speaker Amplifiers, earpiece driver and Direct-Path stereo Headphone drivers. With three audio serial interfaces, the AIC3262 allows for multiple connections to other devices, such as application processor, Bluetooth, or baseband processors.

PCB design board Texas Instruments AIC3262-STICKEVM on eBay PCB design board Texas Instruments AIC3262-STICKEVM on Amazon

 
 

PCB design board Texas Instruments CDCLVD2102EVM

The CDCLVD1204/CDCLVD2102 are high-performance, low-additive jitter clock buffers. They have two universal input buffers that support single-ended or differential clock inputs and are selectable through a control pin (for CDCLVD1204 only). The devices also feature on-chip bias generators that can provide the LVDS common-mode voltage to the device inputs.

PCB design board Texas Instruments CDCLVD2102EVM on eBay PCB design board Texas Instruments CDCLVD2102EVM on Amazon

 
 

PCB design board Texas Instruments TLV62065EVM-719

The TLV62065EVM-719 is a fully assembled and tested platform for evaluating the performance of the TLV62065 2.0-A step-down converter. The user’s guide document includes schematic diagrams, printed circuit board (PCB) layout, bill of materials, and test data. Throughout this document, the abbreviations EVM, TLV62065EVM, and the term evaluation module are synonymous with the TLV62065EVM-719 unless otherwise noted.

PCB design board Texas Instruments TLV62065EVM-719 on eBay PCB design board Texas Instruments TLV62065EVM-719 on Amazon

 
 

PCB design board Texas Instruments TPS542941EVM-057

The Texas Instruments TPS542941EVM-057 evaluation module (EVM) helps designers evaluate the performance of the TPS542941 2A/3A Output, 18V, Dual Synchronous Step-Down Converter.

PCB design board Texas Instruments TPS542941EVM-057 on eBay PCB design board Texas Instruments TPS542941EVM-057 on Amazon

 
 

PCB design board Texas Instruments LM62EVAL

2.7V, 15.6mV/deg C, SOT-23 Temperature Sensor

PCB design board Texas Instruments LM62EVAL on eBay PCB design board Texas Instruments LM62EVAL on Amazon

 
 

PCB design board Texas Instruments TPS62120EVM-640

The TPS62120EVM-640 is a fully assembled and tested platform for evaluating the operation and performance of the TPS62120 converter. The TPS62120EVM-640 has an input voltage range from 2.0 V up to 15 V, and the output voltage is adjustable with an external feedback divider network in the range of 1.2 V to 5.5 V. The maximum output current of the EVM circuit is 75 mA

PCB design board Texas Instruments TPS62120EVM-640 on eBay PCB design board Texas Instruments TPS62120EVM-640 on Amazon




Copyright © Bargainplace.uk Inc. All Rights Reserved. In association with Bargainplace.co.uk