Starter kit Texas Instruments TMDSDOCK28035 Stockists

The C2000 Experimenter Kits from Texas Instruments are ideal products for OEMs to use for initial device exploration and testing. The Piccolo Experimenter Kit has a docking station that features on board USB JTAG emulation, access to all controlCARD signals, breadboard areas and RS-232 and JTAG connectors. Each kit contains a 28035 controlCARD.


Bargain Price: £160.00

Starter kit Texas Instruments TMDSDOCK28035 Deals on eBay Starter kit Texas Instruments TMDSDOCK28035 Deals on Amazon
StockistProductPrice 
BargainplaceStarter kit Texas Instruments TMDSDOCK28035£160.00Visit Store


Starter kit Texas Instruments TMDSDOCK28035 Related Products:

 
 

PCB design board Texas Instruments TPS22902BEVM

The TPS22902BEVM is an evaluation module for the Texas Instruments family of low-input voltage, ultra-low rON load switches. This EVM operates over a 1 V to 3.6 V range and provides a continuous output current of up to 110 mA. Additional open resistor and capacitor footprints allow for the use of customer-selected input and output load values. The TPS22902BEVM accepts a YFP-4 packaged load switch for any of three (3) possible devices: TPS22901, TPS22902, or TPS22902B.

PCB design board Texas Instruments TPS22902BEVM on eBay PCB design board Texas Instruments TPS22902BEVM on Amazon

 
 

PCB design board Texas Instruments LMP8646EB/NOPB

The LMP8646 Evaluation Board (LMP8646EB) is designed to ease evaluation and design-in of TI's LMP8646, a Precision Current Limiter. The LMP8646 is used to detect small differential voltages across a sense resistor in the presence of high input common mode voltages. On board with the current limiter is the LM3102, a Step Down Switching Regulator that is capable of supplying 2.5A to loads.

PCB design board Texas Instruments LMP8646EB/NOPB on eBay PCB design board Texas Instruments LMP8646EB/NOPB on Amazon

 
 

PCB design board Texas Instruments TPA6101A2EVM

The TPA6101A2 is a stereo headphone amplifier capable of delivering 50mW of continuous RMS power per channel into 16-Ohm speakers. The amplifier's gain is internally set to 2dB (inverting) to save board space by eliminating six external resistors.

PCB design board Texas Instruments TPA6101A2EVM on eBay PCB design board Texas Instruments TPA6101A2EVM on Amazon

 
 

PCB design board Texas Instruments INA230EVM

The INA230EVM is a platform for evaluating the performance of the INA230 under various signal, shunt, and supply conditions.

PCB design board Texas Instruments INA230EVM on eBay PCB design board Texas Instruments INA230EVM on Amazon

 
 

PCB design board Texas Instruments TMDSHVRESLLCKIT

The C2000TM High Voltage Resonant LLC Developer’s Kit is designed to show users how to quickly implement a digitally controlled Resonant LLC topology DC/DC converter. This is a HIGH VOLTAGE kit intended to support voltage levels that are commonly used in end equipment designs, and gives designers the opportunity to experiment with multiple control methods. This kit is an excellent companion to the primary side TMDSHVBLPFCKIT and TMDSHVPFCKITs providing a complete evaluation platform for power factor corrected AC input stages to a high efficiency DC/DC output stage.

PCB design board Texas Instruments TMDSHVRESLLCKIT on eBay PCB design board Texas Instruments TMDSHVRESLLCKIT on Amazon

 
 

PCB design board Texas Instruments TXS0206AEVM

The TXS0206A EVM was created to allow simplified evaluation and prototyping without the need for full board development. This EVM provides peripheral header style pads for probing and signal connection to each device pin.

PCB design board Texas Instruments TXS0206AEVM on eBay PCB design board Texas Instruments TXS0206AEVM on Amazon

 
 

PCB design board Texas Instruments LMP8358MAEVAL/NOPB

The LMP8358MAEVAL Evaluation Board provides a platform to test the performance of the LMP8358 Zero-Drift, Programmable Instrumentation Amplifier with Diagnostics. This evaluation board is equipped with GPSI-14 interface. TI provides software and GPSI-14 compatible USB dongle so that the user may program SPI settings from a PC.

PCB design board Texas Instruments LMP8358MAEVAL/NOPB on eBay PCB design board Texas Instruments LMP8358MAEVAL/NOPB on Amazon

 
 

PCB design board Texas Instruments TPS54425EVM-608

The TPS54425EVM-608 is a fully assembled and tested circuit for evaluating the TPS54425 Synchronous Step-Down SWIFT™ Converter. The TPS54425EVM-608 operates from a 4.5V to 18V input and delivers a 1.05V output at 4A.

PCB design board Texas Instruments TPS54425EVM-608 on eBay PCB design board Texas Instruments TPS54425EVM-608 on Amazon

 
 

PCB design board Texas Instruments SN65LVDS16EVM

This Evaluation Module (EVM) facilitates the experimental testing of the Texas Instruments SN65LVDS16 Repeater/Translator silicon device. This device accepts low-voltage PECL input levels and Translates them to LVDS output levels as defined by TIA/EIA-644-A standard. This device operates at clock rates up to 2.0 GHz at either 3.3 V or 2.5 V supply operation, with less than 23 ps of total jitter.

PCB design board Texas Instruments SN65LVDS16EVM on eBay PCB design board Texas Instruments SN65LVDS16EVM on Amazon

 
 

PCB design board Texas Instruments TPS2557DRBEVM-423

The TPS2556EVM-423 and TPS2557EVM-423 are evaluation modules (EVM) for Texas Instruments power-distribution switches with adjustable current-limit. These EVMs operate over a 2.5-V to 6.5-V range. An on-board jumper sets the output current-limit to either 0.5 A or 1 A.

PCB design board Texas Instruments TPS2557DRBEVM-423 on eBay PCB design board Texas Instruments TPS2557DRBEVM-423 on Amazon




Copyright © Bargainplace.uk Inc. All Rights Reserved. In association with Bargainplace.co.uk