Starter kit Texas Instruments TMDSRESDCKIT Stockists

The C2000 Resonant DC/DC Developer's Kit is an designed to show users how to design a digitally controlled resonant converter. Based on a single transformer LLC resonant DC/DC converter design, the EVM supports four different feedback methods, loss less current sensing for fault protection, and an active load for transient response tuning. The EVM also features onboard USB JTAG emulation, requiring no external JTAG emulator.


Bargain Price: £330.00

Starter kit Texas Instruments TMDSRESDCKIT Deals on eBay Starter kit Texas Instruments TMDSRESDCKIT Deals on Amazon
StockistProductPrice 
BargainplaceStarter kit Texas Instruments TMDSRESDCKIT£330.00Visit Store


Starter kit Texas Instruments TMDSRESDCKIT Related Products:

 
 

PCB design board Texas Instruments TPS650061EVM-584

The TPS650061EVM-584 is a fully assembled and tested circuit for evaluating the TPS650061 2.25MHz Step-Down Converter, which contains 1 DC/DC switcher, 2 Low Dropout Regulators and a spread sprectrum clock to supress EMI noise. The TPS650061 operates from a 2.3V to 6V supply.

PCB design board Texas Instruments TPS650061EVM-584 on eBay PCB design board Texas Instruments TPS650061EVM-584 on Amazon

 
 

PCB design board Texas Instruments TPS2391EVM

The -48 V TPS2391 hot swap EVM contains all the components needed to implement a complete telecom hot swap interface. In addition, it contains some additional components and PCB patterns to facilitate evaluation of the device.

PCB design board Texas Instruments TPS2391EVM on eBay PCB design board Texas Instruments TPS2391EVM on Amazon

 
 

PCB design board Texas Instruments VCA2613EVM

The VCA2613 is a dual, variable gain amplifier including a low-noise preamp (LNP). The VCA2613EVM evaluation module is designed to provide a complete environment when evaluating the VCA2613. The user can apply the input signal either to the LNP, or directly to the VCA section. The differential outputs of the VCA2613 are buffered using an op amp in a difference amplifier configuration. This amplifier is also capable of driving a terminated 50ohm load, suitable for lab test equipment. Switches allow the user to operate the VCA2613 in all possible configurations.

PCB design board Texas Instruments VCA2613EVM on eBay PCB design board Texas Instruments VCA2613EVM on Amazon

 
 

PCB design board Texas Instruments ADS7829EVM

The Modular MSOP8 Evaluation Module is an updated version of the popular Burr-Brown DEM-MSOP8 evaluation board. The EVM is designed to support several Analog to Digital Converters including the ADS7826, ADS7827, or ADS7829. These ADCs have resolutions of 10,8,and 12 bits respectively.

PCB design board Texas Instruments ADS7829EVM on eBay PCB design board Texas Instruments ADS7829EVM on Amazon

 
 

PCB design board Texas Instruments LMZ14201EXTEVAL/NOPB

The SIMPLE SWITCHER power module evaluation board is optimized for peak performance and increased flexibility. By incorporating additional ceramic and an aluminum filter capacitor, the power module EVAL board demonstrates the low output ripple, fast transient response, and low conducted and radiated EMI performance of the device. Adjusting the output voltage, optimizing the control loop circuitry, and fine-tuning the filter capacitance is ease, with convenient size and placement of the passive components on the board. Finally, the excellent thermal performance of the power modules is enhanced using a 4-layer 1oz copper PCB.

PCB design board Texas Instruments LMZ14201EXTEVAL/NOPB on eBay PCB design board Texas Instruments LMZ14201EXTEVAL/NOPB on Amazon

 
 

PCB design board Texas Instruments TPS54291EVM-431

The TPS54291EVM-431 evaluation module (EVM) is a dual synchronous buck converter providing fixed 3.3V and 1.2V outputs at up to 1.5A and 2.5A respectively from a 12V bus. The EVM is designed to start-up from a single supply, so no additional bias voltages are require for start-up. The module uses the TPS54291 600kHz Dual Synchronous Buck Converter with integrated MOSETs. TPS54291EVM-431 is designed to use a regulated 12V (+10% /–20%) bus to produce two regulated power rails, 3.3V at 1.5A and 1.2V at 2.5A.

PCB design board Texas Instruments TPS54291EVM-431 on eBay PCB design board Texas Instruments TPS54291EVM-431 on Amazon

 
 

PCB design board Texas Instruments TRF3761EVM-X

The TRF3671EVM-X is a demonstration fixture that is designed to evaluate the performance of the TRF3761 Low Noise Integer N PLL Frequency Synthesizer with Integrated VCO. The TRF3671EVM-X is a partially populated demonstration fixture. The TRF3671EVM-X requires the user to mount a TRF3761 device to the EVM PCB. This demonstration fixture allows users to pick the TRF3761-X device that most closely meets their frequency requirements.

PCB design board Texas Instruments TRF3761EVM-X on eBay PCB design board Texas Instruments TRF3761EVM-X on Amazon

 
 

PCB design board Texas Instruments TPS54821EVM-049

The Texas Instruments TPS54821EVM-049 evaluation module (EVM) helps designers evaluate the TPS54821 Synchronous Step-Down SWIFT Converter with Hiccup Overcurrent Protection. The EVM accepts an 8V to 17V input and provides a 3.3V output at 8A. Terminal blocks are provided for input and output voltages.

PCB design board Texas Instruments TPS54821EVM-049 on eBay PCB design board Texas Instruments TPS54821EVM-049 on Amazon

 
 

PCB design board Texas Instruments DAC7568EVM

The DACxx68 EVM is an evaluation module designed for the prototyping and evaluation of the DAC7568, DAC8168 and DAC8568 digital to analog converters (DAC). These 12 to 16-bit, eight channel string DACs operate with a high speed serial clock (up to 50MHz) and offer excellent performance with ultra low power consumption. These devices are pin-compatible offering an easy upgrade path from 12-bit to 14- and 16-bit resolution.

PCB design board Texas Instruments DAC7568EVM on eBay PCB design board Texas Instruments DAC7568EVM on Amazon

 
 

PCB design board Texas Instruments BUF08821EVM-USB

The BUF08821EVM is a platform for evaluating the performance of the BUF08821 gamma-voltage generator under various signal, reference and supply conditions. This device offers 8 programmable gamma channels, 1 programmable Vcom channels, and integrated 2 bank memory.

PCB design board Texas Instruments BUF08821EVM-USB on eBay PCB design board Texas Instruments BUF08821EVM-USB on Amazon




Copyright © Bargainplace.uk Inc. All Rights Reserved. In association with Bargainplace.co.uk